Free tool
Rule out the usual hiding places first. If the piece really is gone, check the set piece by piece and leave with the element ID LEGO asks for, or a link to buy the part.
Checking
9,372 pieces in 1,566 part and color combinations, plus 92 minifigures.
LEGO counts 9,030 pieces. This inventory comes from a separate parts catalog and lists 10,001, including the 629 parts inside the minifigures; the two do not always count the same elements, so their totals differ. Spare parts are counted in neither figure.
Builders who report a missing piece often find it in one of these places. Tick each one off as you look.
These parts appear in this set in two colors that are easy to confuse. If you are one short in one color, check whether it went in where the other color belongs. Each color has its own element ID in the parts list at the back of the instructions.
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Red ×4
Trans-Red ×2
Trans-Red is see-through: hold the piece up to a light.
Plate 1 x 2
Trans-Red ×16
Red ×4
Trans-Red is see-through: hold the piece up to a light.
Plate Round 1 x 1 with Solid Stud
Red ×15
Trans-Red ×3
Trans-Red is see-through: hold the piece up to a light.
Tile 1 x 2 with Groove
Trans-Red ×2
Red ×2
Trans-Red is see-through: hold the piece up to a light.
Plate 1 x 2
White ×15
Trans-Clear ×2
Trans-Clear is see-through: hold the piece up to a light.
Plate Round 1 x 1 with Solid Stud
Trans-Clear ×2
White ×11
Trans-Clear is see-through: hold the piece up to a light.
Plate Round 1 x 1 with Solid Stud
Trans-Yellow ×4
Yellow ×11
Trans-Yellow is see-through: hold the piece up to a light.
Brick Round 2 x 2 with Axle Hole
Orange ×2
Trans-Orange ×9
Trans-Orange is see-through: hold the piece up to a light.
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Orange ×8
Trans-Orange ×4
Trans-Orange is see-through: hold the piece up to a light.
Plate 1 x 2
Orange ×10
Trans-Orange ×28
Trans-Orange is see-through: hold the piece up to a light.
Brick Curved 2 x 1 No Studs [1/2 Bow]
Dark Bluish Gray ×2
Flat Silver ×4
Dark Bluish Gray is darker than Flat Silver.
Brick Curved 2 x 2 x 2/3
Dark Bluish Gray ×3
Flat Silver ×11
Dark Bluish Gray is darker than Flat Silver.
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Dark Bluish Gray ×12
Flat Silver ×4
Dark Bluish Gray is darker than Flat Silver.
Tile Special 1 x 2 Grille with Bottom Groove
Flat Silver ×38
Dark Bluish Gray ×12
Flat Silver is lighter than Dark Bluish Gray.
Brick Curved 2 x 1 No Studs [1/2 Bow]
Light Bluish Gray ×6
Flat Silver ×4
Light Bluish Gray is lighter than Flat Silver.
Plate Round 1 x 1 with Solid Stud
Flat Silver ×45
Light Bluish Gray ×12
Flat Silver is darker than Light Bluish Gray.
Tile Round 1 x 1
Light Bluish Gray ×2
Flat Silver ×9
Light Bluish Gray is lighter than Flat Silver.
Tile Special 1 x 2 Grille with Bottom Groove
Light Bluish Gray ×3
Flat Silver ×38
Light Bluish Gray is lighter than Flat Silver.
Brick Curved 2 x 1 No Studs [1/2 Bow]
Reddish Brown ×6
Dark Brown ×40
Reddish Brown is redder and lighter than Dark Brown.
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Dark Brown ×14
Reddish Brown ×2
Dark Brown is greener and darker than Reddish Brown.
Brick Sloped Inverted 45° 2 x 1
Reddish Brown ×18
Dark Brown ×2
Reddish Brown is redder and lighter than Dark Brown.
Plate 1 x 2
Dark Brown ×38
Reddish Brown ×2
Dark Brown is greener and darker than Reddish Brown.
Plate 2 x 6
Dark Brown ×9
Reddish Brown ×8
Dark Brown is greener and darker than Reddish Brown.
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Reddish Brown ×2
Dark Brown ×8
Reddish Brown is redder and lighter than Dark Brown.
Tile 1 x 2 with Groove
Reddish Brown ×8
Dark Brown ×4
Reddish Brown is redder and lighter than Dark Brown.
Brick 1 x 2
Tan ×3
Dark Tan ×3
Tan is lighter than Dark Tan.
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Tan ×4
Dark Tan ×4
Tan is lighter than Dark Tan.
Brick Sloped 30° 1 x 2 x 2/3
Dark Tan ×8
Tan ×18
Dark Tan is darker than Tan.
Brick Sloped 45° 2 x 1 with Bottom Pin
Dark Tan ×2
Tan ×14
Dark Tan is darker than Tan.
Plate 1 x 2
Tan ×2
Dark Tan ×6
Tan is lighter than Dark Tan.
Plate 1 x 4
Dark Tan ×2
Tan ×7
Dark Tan is darker than Tan.
Plate 2 x 2 Corner
Dark Tan ×10
Tan ×7
Dark Tan is darker than Tan.
Tile 1 x 2 with Groove
Dark Tan ×2
Tan ×4
Dark Tan is darker than Tan.
Brick 2 x 2
Dark Blue ×2
Black ×2
Dark Blue is bluer and lighter than Black.
Brick Curved 2 x 2 x 2/3
Dark Blue ×8
Black ×8
Dark Blue is bluer and lighter than Black.
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Dark Blue ×4
Black ×5
Dark Blue is bluer and lighter than Black.
Plate 1 x 4
Black ×26
Dark Blue ×5
Black is yellower and darker than Dark Blue.
Tile 1 x 8 with Groove
Dark Blue ×2
Black ×4
Dark Blue is bluer and lighter than Black.
Wedge Plate 2 x 4
Dark Blue ×3
Black ×2
Dark Blue is bluer and lighter than Black.
Arm Mechanical with 2 Clips [Battle Droid]
Dark Bluish Gray ×1
Black ×4
Dark Bluish Gray is lighter than Black.
Bar 1 x 4 x 3 [End Tabs]
Black ×1
Dark Bluish Gray ×1
Black is darker than Dark Bluish Gray.
Bar Holder with Clip
Dark Bluish Gray ×10
Black ×4
Dark Bluish Gray is lighter than Black.
Bracket 1 x 2 - 1 x 2 Inverted
Black ×13
Dark Bluish Gray ×13
Black is darker than Dark Bluish Gray.
Bracket 1 x 2 - 2 x 2
Black ×14
Dark Bluish Gray ×6
Black is darker than Dark Bluish Gray.
Brick 1 x 2
Black ×13
Dark Bluish Gray ×3
Black is darker than Dark Bluish Gray.
Brick 1 x 6
Dark Bluish Gray ×1
Black ×2
Dark Bluish Gray is lighter than Black.
Brick 2 x 2
Black ×2
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Brick 2 x 3
Dark Bluish Gray ×6
Black ×2
Dark Bluish Gray is lighter than Black.
Brick 2 x 4
Black ×2
Dark Bluish Gray ×5
Black is darker than Dark Bluish Gray.
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Dark Bluish Gray ×13
Black ×4
Dark Bluish Gray is lighter than Black.
Brick Curved 2 x 1 No Studs [1/2 Bow]
Dark Bluish Gray ×2
Black ×7
Dark Bluish Gray is lighter than Black.
Brick Curved 2 x 2 x 2/3
Dark Bluish Gray ×3
Black ×8
Dark Bluish Gray is lighter than Black.
Brick Curved 4 x 1 Double, No Studs
Black ×1
Dark Bluish Gray ×10
Black is darker than Dark Bluish Gray.
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Dark Bluish Gray ×12
Black ×5
Dark Bluish Gray is lighter than Black.
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
Dark Bluish Gray ×5
Black ×28
Dark Bluish Gray is lighter than Black.
Brick Sloped 30° 1 x 2 x 2/3
Black ×10
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
Dark Bluish Gray ×1
Black ×4
Dark Bluish Gray is lighter than Black.
Brick Sloped 65° 2 x 2 x 2 with Bottom Tube
Dark Bluish Gray ×4
Black ×2
Dark Bluish Gray is lighter than Black.
Brick Sloped Inverted 45° 2 x 1
Dark Bluish Gray ×4
Black ×2
Dark Bluish Gray is lighter than Black.
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
Black ×9
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed
Black ×2
Dark Bluish Gray ×5
Black is darker than Dark Bluish Gray.
Brick Special 1 x 1 Studs on 4 Sides
Dark Bluish Gray ×3
Black ×2
Dark Bluish Gray is lighter than Black.
Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]
Black ×2
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Brick Special 1 x 1 with Studs on 2 Sides
Dark Bluish Gray ×2
Black ×1
Dark Bluish Gray is lighter than Black.
Brick Special 1 x 2 with Grille
Dark Bluish Gray ×8
Black ×4
Dark Bluish Gray is lighter than Black.
Cone 1 x 1 [Top Groove]
Dark Bluish Gray ×1
Black ×1
Dark Bluish Gray is lighter than Black.
Dish 2 x 2 Inverted [Radar]
Black ×1
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Handlebars
Black ×3
Dark Bluish Gray ×9
Black is darker than Dark Bluish Gray.
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends
Dark Bluish Gray ×6
Black ×1
Dark Bluish Gray is lighter than Black.
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth
Black ×2
Dark Bluish Gray ×1
Black is darker than Dark Bluish Gray.
Plate 1 x 10
Dark Bluish Gray ×2
Black ×2
Dark Bluish Gray is lighter than Black.
Plate 1 x 2
Black ×6
Dark Bluish Gray ×10
Black is darker than Dark Bluish Gray.
Plate 1 x 3
Black ×10
Dark Bluish Gray ×14
Black is darker than Dark Bluish Gray.
Plate 1 x 4
Black ×26
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Plate 1 x 8
Black ×3
Dark Bluish Gray ×3
Black is darker than Dark Bluish Gray.
Plate 2 x 10
Black ×2
Dark Bluish Gray ×3
Black is darker than Dark Bluish Gray.
Plate 2 x 12
Black ×4
Dark Bluish Gray ×1
Black is darker than Dark Bluish Gray.
Plate 2 x 14
Dark Bluish Gray ×1
Black ×1
Dark Bluish Gray is lighter than Black.
Plate 2 x 2
Black ×7
Dark Bluish Gray ×21
Black is darker than Dark Bluish Gray.
Plate 2 x 3
Dark Bluish Gray ×13
Black ×10
Dark Bluish Gray is lighter than Black.
Plate 2 x 4
Dark Bluish Gray ×7
Black ×22
Dark Bluish Gray is lighter than Black.
Plate 2 x 6
Dark Bluish Gray ×12
Black ×1
Dark Bluish Gray is lighter than Black.
Plate 4 x 10
Black ×1
Dark Bluish Gray ×1
Black is darker than Dark Bluish Gray.
Plate 4 x 4
Dark Bluish Gray ×6
Black ×4
Dark Bluish Gray is lighter than Black.
Plate 4 x 6
Dark Bluish Gray ×2
Black ×3
Dark Bluish Gray is lighter than Black.
Plate 6 x 16
Dark Bluish Gray ×1
Black ×2
Dark Bluish Gray is lighter than Black.
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Black ×2
Dark Bluish Gray ×9
Black is darker than Dark Bluish Gray.
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
Black ×4
Dark Bluish Gray ×11
Black is darker than Dark Bluish Gray.
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
Black ×10
Dark Bluish Gray ×9
Black is darker than Dark Bluish Gray.
Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]
Black ×8
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
Dark Bluish Gray ×18
Black ×15
Dark Bluish Gray is lighter than Black.
Plate Special 1 x 2 Side Handle [Free Ends]
Dark Bluish Gray ×3
Black ×8
Dark Bluish Gray is lighter than Black.
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
Dark Bluish Gray ×8
Black ×2
Dark Bluish Gray is lighter than Black.
Plate Special 1 x 2 with Door Rail
Dark Bluish Gray ×1
Black ×1
Dark Bluish Gray is lighter than Black.
Plate Special 1 x 2 with Handle on End [Closed Ends]
Dark Bluish Gray ×12
Black ×10
Dark Bluish Gray is lighter than Black.
Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]
Black ×1
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
Dark Bluish Gray ×4
Black ×2
Dark Bluish Gray is lighter than Black.
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
Black ×15
Dark Bluish Gray ×10
Black is darker than Dark Bluish Gray.
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
Black ×2
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Plate Special 3 x 2 with Rounded End, Hole
Black ×4
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Tail Shuttle - Small
Dark Bluish Gray ×1
Black ×2
Dark Bluish Gray is lighter than Black.
Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes
Black ×3
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Technic Axle Connector Smooth [with x Hole + Orientation]
Dark Bluish Gray ×11
Black ×17
Dark Bluish Gray is lighter than Black.
Technic Axle and Pin Connector Angled #1
Dark Bluish Gray ×2
Black ×2
Dark Bluish Gray is lighter than Black.
Technic Beam 1 x 11 Thick
Black ×2
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Technic Beam 1 x 15 Thick
Black ×2
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole
Black ×4
Dark Bluish Gray ×6
Black is darker than Dark Bluish Gray.
Technic Beam 1 x 5 Thick
Dark Bluish Gray ×2
Black ×7
Dark Bluish Gray is lighter than Black.
Technic Beam 1 x 7 Thick
Dark Bluish Gray ×8
Black ×2
Dark Bluish Gray is lighter than Black.
Technic Beam 1 x 9 Bent (7 - 3) Thick
Dark Bluish Gray ×6
Black ×2
Dark Bluish Gray is lighter than Black.
Technic Beam 1 x 9 Thick
Dark Bluish Gray ×4
Black ×6
Dark Bluish Gray is lighter than Black.
Technic Beam 2 x 4 L-Shape Thick
Black ×1
Dark Bluish Gray ×10
Black is darker than Dark Bluish Gray.
Technic Beam 3 x 3 T-Shape Thick
Dark Bluish Gray ×5
Black ×8
Dark Bluish Gray is lighter than Black.
Technic Beam 3 x 5 L-Shape Thick
Black ×5
Dark Bluish Gray ×4
Black is darker than Dark Bluish Gray.
Technic Brick 1 x 1 with Pin Hole
Black ×1
Dark Bluish Gray ×15
Black is darker than Dark Bluish Gray.
Technic Brick 1 x 12 [11 Pin Holes]
Black ×3
Dark Bluish Gray ×16
Black is darker than Dark Bluish Gray.
Technic Brick 1 x 16 [15 Pin Holes]
Black ×8
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Technic Brick 1 x 2 [1 Pin Hole]
Dark Bluish Gray ×18
Black ×10
Dark Bluish Gray is lighter than Black.
Technic Brick 1 x 2 [2 Pin Holes]
Dark Bluish Gray ×23
Black ×5
Dark Bluish Gray is lighter than Black.
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
Dark Bluish Gray ×21
Black ×3
Dark Bluish Gray is lighter than Black.
Technic Brick 1 x 4 [3 Pin Holes]
Dark Bluish Gray ×11
Black ×12
Dark Bluish Gray is lighter than Black.
Technic Brick 1 x 6 [5 Pin Holes]
Dark Bluish Gray ×10
Black ×3
Dark Bluish Gray is lighter than Black.
Technic Link 1 x 6 without Stoppers
Black ×2
Dark Bluish Gray ×2
Black is darker than Dark Bluish Gray.
Technic Link Tread Wide with Two Pin Holes, Reinforced
Black ×22
Dark Bluish Gray ×22
Black is darker than Dark Bluish Gray.
Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]
Black ×4
Dark Bluish Gray ×3
Black is darker than Dark Bluish Gray.
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
Black ×4
Dark Bluish Gray ×10
Black is darker than Dark Bluish Gray.
Tile 1 x 4 with Groove
Dark Bluish Gray ×5
Black ×10
Dark Bluish Gray is lighter than Black.
Tile 1 x 8 with Groove
Dark Bluish Gray ×2
Black ×4
Dark Bluish Gray is lighter than Black.
Tile 2 x 2 with Groove
Dark Bluish Gray ×3
Black ×7
Dark Bluish Gray is lighter than Black.
Tile Round 2 x 2 with Bottom Stud Holder
Black ×2
Dark Bluish Gray ×6
Black is darker than Dark Bluish Gray.
Tile Special 1 x 2 Grille with Bottom Groove
Black ×2
Dark Bluish Gray ×12
Black is darker than Dark Bluish Gray.
Tile Special 1 x 2 with Handle
Dark Bluish Gray ×2
Black ×1
Dark Bluish Gray is lighter than Black.
Tile Special 2 x 2 with Top Pin
Dark Bluish Gray ×1
Black ×2
Dark Bluish Gray is lighter than Black.
Weapon Gun / Pistol Two Barrel, 10 Ribs
Dark Bluish Gray ×2
Black ×3
Dark Bluish Gray is lighter than Black.
Wedge Plate 3 x 3 Cut Corner
Dark Bluish Gray ×2
Black ×2
Dark Bluish Gray is lighter than Black.
Wedge Plate 3 x 6 Cut Corners
Dark Bluish Gray ×1
Black ×2
Dark Bluish Gray is lighter than Black.
LEGO's request form asks for the set number (BIGBOX) and each piece's element ID, both listed above.
As an eBay Partner, we earn from qualifying purchases at no extra cost to you.
Animal Body Part / Plant, Tail / Claw / Horn / Branch / Tentacle, End Section
×2
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
×9
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
×12
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
×20
Arm Mechanical with 2 Clips [Battle Droid]
Also in Dark Bluish Gray
×4
Bar 1 x 4 x 3 [End Tabs]
Also in Dark Bluish Gray
×1
Bar 4L (Lightsaber Blade / Wand)
×2
Bar 6L with Stop Ring
×3
Bar 7 x 3 with Double Clips (Ladder) [Straight Clips]
×3
Bar Holder with Clip
Also in Dark Bluish Gray
×4
Bar, 4 Top Bars, Palm Tree Top
×4
Bracket 1 x 2 - 1 x 2
×16
Bracket 1 x 2 - 1 x 2 Inverted
Also in Dark Bluish Gray
×13
Bracket 1 x 2 - 1 x 4 [Rounded Corners]
×7
Bracket 1 x 2 - 2 x 2
Also in Dark Bluish Gray
×14
Bracket 1 x 2 - 2 x 2 Inverted
×30
Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom
×7
Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder
×4
Brick 1 x 1
×2
Brick 1 x 16
×3
Brick 1 x 2
Also in Dark Bluish Gray
×13
Brick 1 x 6
Also in Dark Bluish Gray
×2
Brick 2 x 2
Also in Dark BlueAlso in Dark Bluish Gray
×2
Brick 2 x 3
Also in Dark Bluish Gray
×2
Brick 2 x 4
Also in Dark Bluish Gray
×2
Brick 2 x 8
×1
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Also in Dark Bluish Gray
×4
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in Dark Bluish Gray
×7
Brick Curved 2 x 2 x 2/3
Also in Dark Bluish GrayAlso in Dark Blue
×8
Brick Curved 4 x 1 Double, No Studs
Also in Dark Bluish Gray
×1
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Also in Dark Bluish GrayAlso in Dark Blue
×5
Brick Curved Inverted 4 x 1
×6
Brick Round 1 x 1 Open Stud
×2
Brick Round 2 x 2 [Grill]
×3
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
Also in Dark Bluish Gray
×28
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×9
Brick Sloped 30° 1 x 2 x 2/3
Also in Dark Bluish Gray
×10
Brick Sloped 33° 3 x 1
×6
Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder
×1
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
Also in Dark Bluish Gray
×4
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
×7
Brick Sloped 45° 2 x 2 with Complex Control Panel with Red and Green Lamps Print
×2
Brick Sloped 45° 2 x 2 with Green Radar, Green/Red Buttons and Disk Slot Print
×3
Brick Sloped 45° 2 x 2 with Silver Control Panel and Screen Print
×1
Brick Sloped 45° 2 x 8
×2
Brick Sloped 65° 2 x 2 x 2 with Bottom Tube
Also in Dark Bluish Gray
×2
Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin
×2
Brick Sloped Inverted 45° 2 x 1
Also in Dark Bluish Gray
×2
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
Also in Dark Bluish Gray
×9
Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed
Also in Dark Bluish Gray
×2
Brick Special 1 x 1 Studs on 4 Sides
Also in Dark Bluish Gray
×2
Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]
Also in Dark Bluish Gray
×2
Brick Special 1 x 1 with Handle
×2
Brick Special 1 x 1 with Stud on 1 Side
×2
Brick Special 1 x 1 with Studs on 2 Sides
Also in Dark Bluish Gray
×1
Brick Special 1 x 2 with Grille
Also in Dark Bluish Gray
×4
Brick Special 1 x 2 with Handle
×6
Brick Special 1 x 4 with Groove
×1
Brick Wedged 2 x 2 Facet
×2
Brick Wedged, Curved 1 x 2 x 2/3 No Studs, Wing End
×1
Brick Wedged, Curved 2 x 3 x 2/3 Two Studs, Wing End
×2
Brick Wedged, Curved Inverted 6 x 4
×1
Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs
×1
Brick Wedged, Sloped 4 x 2 Triple Left
×2
Brick Wedged, Sloped 4 x 2 Triple Right
×2
Cone 1 x 1 Inverted with Bar at Bottom (Ice Cream Cone)
×1
Cone 1 x 1 [Top Groove]
Also in Dark Bluish Gray
×1
Dish 2 x 2 Inverted [Radar]
Also in Dark Bluish Gray
×1
Dish 4 x 4 Inverted [Radar]
×1
Door Frame 1 x 4 x 6 Type 2
×2
Equipment Hose Nozzle / Gun with Side String Hole Simplified
×1
Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3
×2
Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun
×6
Flag 2 x 2 Square, Flat Clip Edge [Thick Clips]
×1
Flag 2 x 2 Trapezoid with Flat Area between Clips
×2
Gate 1 x 4 x 9 Arched with Bars and Three Studs
×2
Handlebars
Also in Dark Bluish Gray
×3
Hinge Brick 1 x 2 Base
×4
Hinge Brick 1 x 2 Top Plate Thin
×1
Hinge Brick 2 x 2 Top Plate Thin
×1
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends
Also in Dark Bluish Gray
×1
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth
Also in Dark Bluish Gray
×2
Hinge Cylinder 1 x 3 Locking with 1 Finger and Technic Friction Pin with Round Hole
×1
Hinge Plate 1 x 2 Locking with 2 Fingers On End, with Groove, 9 Teeth
×1
Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]
×16
Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Bottom
×2
Large Figure Foot, with Ball Socket 5 x 6 x 2
×4
Large Figure Skeletal, Limb with Ball Joint and Ball Socket, Short
×12
Large Figure Skeletal, Limb, 5L with Ball Joint on Axle and Ball Socket
×2
Large Figure Weapon Ammo, Flexible Ammunition Belt
×1
Launcher, Plate Special 1 x 2 with Mini Blaster
×2
Launcher, Weapon Gun / Blaster / Shooter Mini
×4
Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings
×1
Plate 1 x 10
Also in Dark Bluish Gray
×2
Plate 1 x 12
×6
Plate 1 x 2
Also in Dark Bluish Gray
×6
Plate 1 x 3
Also in Dark Bluish Gray
×10
Plate 1 x 4
Also in Dark Bluish GrayAlso in Dark Blue
×26
Plate 1 x 8
Also in Dark Bluish Gray
×3
Plate 2 x 10
Also in Dark Bluish Gray
×2
Plate 2 x 12
Also in Dark Bluish Gray
×4
Plate 2 x 14
Also in Dark Bluish Gray
×1
Plate 2 x 2
Also in Dark Bluish Gray
×7
Plate 2 x 2 Corner
×4
Plate 2 x 3
Also in Dark Bluish Gray
×10
Plate 2 x 4
Also in Dark Bluish Gray
×22
Plate 2 x 6
Also in Dark Bluish Gray
×1
Plate 4 x 10
Also in Dark Bluish Gray
×1
Plate 4 x 12
×2
Plate 4 x 4
Also in Dark Bluish Gray
×4
Plate 4 x 6
Also in Dark Bluish Gray
×3
Plate 4 x 8
×1
Plate 6 x 16
Also in Dark Bluish Gray
×2
Plate 6 x 8
×1
Plate Round 1 x 1 with Solid Stud
×13
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Also in Dark Bluish Gray
×2
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
Also in Dark Bluish Gray
×4
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
Also in Dark Bluish Gray
×10
Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]
Also in Dark Bluish Gray
×8
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
Also in Dark Bluish Gray
×15
Plate Special 1 x 2 Side Handle [Free Ends]
Also in Dark Bluish Gray
×8
Plate Special 1 x 2 [Side Handle Closed Ends]
×7
Plate Special 1 x 2 with Angled Handles on Side
×14
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
Also in Dark Bluish Gray
×2
Plate Special 1 x 2 with Clip Horizontal on End
×1
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
×11
Plate Special 1 x 2 with Door Rail
Also in Dark Bluish Gray
×1
Plate Special 1 x 2 with Handle on End [Closed Ends]
Also in Dark Bluish Gray
×10
Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]
Also in Dark Bluish Gray
×1
Plate Special 1 x 2 with Handles on Ends
×2
Plate Special 1 x 2 with Ladder
×2
Plate Special 1 x 2, Top Clip [Split]
×10
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
Also in Dark Bluish Gray
×2
Plate Special 1 x 4 with Angled Tubes
×1
Plate Special 1 x 4 with Bar Down
×2
Plate Special 1 x 4 with Towball
×1
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
Also in Dark Bluish Gray
×15
Plate Special 2 x 2 with 2 Pin Holes
×3
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
Also in Dark Bluish Gray
×2
Plate Special 2 x 2 with Towball and Hole
×2
Plate Special 2 x 2 with Wheel Holders
×1
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]
×3
Plate Special 3 x 2 with Rounded End, Hole
Also in Dark Bluish Gray
×4
Plate Special 4 x 4, Studs on One Edge Plain]
×2
Propeller 3 Blades 5 Diameter, Pin Hole
×4
Propeller 4 Blade 5 Diameter with Rounded Ends, Open Hub
×2
Spoiler 2 x 4 with Handle [Plain]
×2
Steering Stand 1 x 2 with Black Steering Wheel
×3
Support 1 x 1 x 5 1/3 Spiral Staircase Axle
×2
Tail Shuttle - Small
Also in Dark Bluish Gray
×2
Tap 1 x 1 without Hole in Spout
×1
Technic Axle 10
×1
Technic Axle 12
×1
Technic Axle 2 Notched
×10
Technic Axle 4
×27
Technic Axle 6
×8
Technic Axle 8
×5
Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes
Also in Dark Bluish Gray
×3
Technic Axle Connector Smooth [with x Hole + Orientation]
Also in Dark Bluish Gray
×17
Technic Axle Connector with Axle Hole
×6
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle
×9
Technic Axle and Pin Connector Angled #1
Also in Dark Bluish Gray
×2
Technic Axle and Pin Connector Angled #3 - 157.5°
×4
Technic Axle and Pin Connector Angled #5 - 112.5°
×1
Technic Axle and Pin Connector Angled #6 - 90°
×2
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole
×2
Technic Axle and Pin Connector Perpendicular Split
×2
Technic Ball Joint
×1
Technic Ball Joint with Through Axle Hole
×10
Technic Beam 1 x 11 Thick
Also in Dark Bluish Gray
×2
Technic Beam 1 x 13 Thick
×8
Technic Beam 1 x 15 Thick
Also in Dark Bluish Gray
×2
Technic Beam 1 x 2 Thick
×1
Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole
Also in Dark Bluish Gray
×4
Technic Beam 1 x 2 with Ball Joint Straight, Smooth Ball
×5
Technic Beam 1 x 3 Thin
×6
Technic Beam 1 x 5 Thick
Also in Dark Bluish Gray
×7
Technic Beam 1 x 5 Thin with Axle Holes on Ends
×2
Technic Beam 1 x 6 Thin
×6
Technic Beam 1 x 7 Bent (4 - 4) Thick
×6
Technic Beam 1 x 7 Thick
Also in Dark Bluish Gray
×2
Technic Beam 1 x 9 Bent (7 - 3) Thick
Also in Dark Bluish Gray
×2
Technic Beam 1 x 9 Thick
Also in Dark Bluish Gray
×6
Technic Beam 2 x 4 L-Shape Thick
Also in Dark Bluish Gray
×1
Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank
×2
Technic Beam 3 x 3 L-Shape Thin
×2
Technic Beam 3 x 3 T-Shape Thick
Also in Dark Bluish Gray
×8
Technic Beam 3 x 5 L-Shape Thick
Also in Dark Bluish Gray
×5
Technic Beam Triangle Thin [Type II]
×2
Technic Brick 1 x 1 with Pin Hole
Also in Dark Bluish Gray
×1
Technic Brick 1 x 10 [9 Pin Holes]
×22
Technic Brick 1 x 12 [11 Pin Holes]
Also in Dark Bluish Gray
×3
Technic Brick 1 x 14 [13 Pin Holes]
×2
Technic Brick 1 x 16 [15 Pin Holes]
Also in Dark Bluish Gray
×8
Technic Brick 1 x 2 [1 Pin Hole]
Also in Dark Bluish Gray
×10
Technic Brick 1 x 2 [2 Pin Holes]
Also in Dark Bluish Gray
×5
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
Also in Dark Bluish Gray
×3
Technic Brick 1 x 4 [3 Pin Holes]
Also in Dark Bluish Gray
×12
Technic Brick 1 x 6 [5 Pin Holes]
Also in Dark Bluish Gray
×3
Technic Brick 4 x 6 with 2 x 4 Opening
×1
Technic Brick 5 x 5 Right Angle (1 x 4 - 1 x 4)
×6
Technic Brick Special 2 x 2 with 10.2mm Balls with Holes and Axle Hole
×1
Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole
×1
Technic Brick Special 2 x 2 with Pin Hole, with 2 Rotation Joint Sockets
×1
Technic Disc 3 x 3
×4
Technic Gear 12 Tooth Double Bevel
×4
Technic Gear 20 Tooth Double Bevel with Axle Hole Type 1 [+ Opening]
×3
Technic Gear 20 Tooth Double Bevel with Axle Hole Type 2 [X Opening]
×1
Technic Gear Rack 1 x 4
×1
Technic Gear Rack 1 x 8 with Holes
×1
Technic Knob Wheel
×6
Technic Link 1 x 6 without Stoppers
Also in Dark Bluish Gray
×2
Technic Link 1 x 9
×2
Technic Link Tread Wide with Two Pin Holes, Reinforced
Also in Dark Bluish Gray
×22
Technic Link Tread with Beveled Edge
×52
Technic Pin Connector 3L with 2 Pins and Center Hole
×22
Technic Pin Connector Double with Bar [2 Holes]
×2
Technic Pin Connector Hub with 1 Pin with Friction Ridges Lengthwise
×15
Technic Pin Connector Perpendicular 2 x 2 Bent
×2
Technic Pin Connector Perpendicular 2 x 4 Bent - Beam with 90 Hole Ø 4.8
×2
Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]
Also in Dark Bluish Gray
×4
Technic Pin Connector Plate with One Hole (Single on Bottom)
×2
Technic Pin Connector Round [Slotted]
×8
Technic Pin Connector Toggle Joint Smooth Double with Axle and Pin Holes
×2
Technic Pin Double Triangle 1 x 3 with 2 Clips Completely Round Pinholes
×14
Technic Pin Double with Axle Hole
×6
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]
×9
Technic Pin with Friction Ridges Lengthwise and Center Slots
×277
Technic Pin with Friction Ridges Lengthwise and Towball
×18
Technic Plate 2 x 4 [3 Holes]
×3
Technic Plate 2 x 6 [5 Holes]
×8
Technic Plate 2 x 8 [7 Holes]
×5
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
Also in Dark Bluish Gray
×4
Technic Tooth 1 x 3 with Axle Hole [Rounded Underside]
×2
Technic Tread Sprocket Wheel Large 10 Tooth
×2
Technic Turntable Small Base, 28 Tooth
×2
Tile 1 x 1 with Groove
×1
Tile 1 x 2 with Avionics Copper, Red & Silver Controls Print
×3
Tile 1 x 2 with Groove
×2
Tile 1 x 3
×3
Tile 1 x 4 with Groove
Also in Dark Bluish Gray
×10
Tile 1 x 8 with Groove
Also in Dark Bluish GrayAlso in Dark Blue
×4
Tile 2 x 2 with Groove
Also in Dark Bluish Gray
×7
Tile Round 2 x 2 with Bottom Stud Holder
Also in Dark Bluish Gray
×2
Tile Special 1 x 2 Grille with Bottom Groove
Also in Dark Bluish Gray
×2
Tile Special 1 x 2 with Handle
Also in Dark Bluish Gray
×1
Tile Special 2 x 2 with Top Pin
Also in Dark Bluish Gray
×2
Tool Hammer / Mallet Large
×9
Tool Screwdriver and Spanner / Wrench
×4
Train Pantograph Shoe with Locking Hinge with 2 Fingers
×2
Tread Small (20 Links)
×2
Turntable 4 x 4 Square Base, Locking
×3
Tyre 14 x 6 Solid Smooth
×2
Tyre 21 x 12 with Offset Tread Small Wide and Center Band
×4
Tyre 24 x 14 Shallow Tread (Tread Small Hub), Band Around Center of Tread
×8
Tyre 37 x 18 R Balloon
×2
Tyre 43.2 x 14 Offset Tread
×1
Tyre 43.2 x 26 Balloon Small
×4
Tyre Offset Tread with Center Band 23 x 7
×3
Weapon Gun / Blaster 1 x 2 x 2/3 with Studs on Sides and Handle
×9
Weapon Gun / Pistol Two Barrel, 10 Ribs
Also in Dark Bluish Gray
×3
Weapon Lightsaber Hilt with Bottom Ring
×11
Wedge Plate 2 x 4
Also in Dark Blue
×2
Wedge Plate 3 x 2 Left
×1
Wedge Plate 3 x 2 Right
×1
Wedge Plate 3 x 3 Cut Corner
Also in Dark Bluish Gray
×2
Wedge Plate 3 x 6 Cut Corners
Also in Dark Bluish Gray
×2
Wedge Plate 4 x 4 with 2 x 2 Cutout
×1
Wedge Plate 4 x 6 Cut Corners
×2
Wheel 30.4 x 20 without Pinholes, with Reinforced Rim
×8
Wheel Hard Plastic Large (54mm D. x 30mm)
×3
Wheel Hard Plastic with Small Cleats and Flanges
×2
Wheel Hard Plastic, Treaded with 7 Pin Holes and 6 Small Holes
×5
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
×4
Bar 1L with Top Stud and Two Side Studs
×3
Bar 5L with Handle (Friction Ram)
×1
Bar 6L with Stop Ring
×3
Bar 8L - Two Stop Rings / One Pin, Technic Figure Ski Pole [Rounded End]
×1
Box 2 x 2 x 2 Door with Slot
×2
Box 2 x 2 x 2 [Hollow Studs]
×2
Bracket 1 x 2 - 1 x 2
×19
Bracket 1 x 2 - 1 x 4 [Rounded Corners]
×3
Bracket 1 x 2 - 2 x 2
×22
Bracket 1 x 2 - 2 x 2 Inverted
×47
Bracket 2 x 2 - 2 x 2
×1
Bracket 5 x 2 x 1 1/3 with Holes, Pin Bottom
×4
Bracket 5 x 2 x 2 1/3 with Holes, Inside Stud Holder
×2
Brick 1 x 1
×8
Brick 1 x 2
×6
Brick 1 x 4
×11
Brick 1 x 8
×2
Brick 2 x 2
×1
Brick 2 x 6
×1
Brick Arch 1 x 12 x 3 Raised Arch
×3
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in Flat Silver
×6
Brick Curved 4 x 1 Double, No Studs
×5
Brick Round 1 x 1 Open Stud
×2
Brick Round 2 x 2 Truncated Cone
×2
Brick Round 2 x 2 [Grill]
×4
Brick Round 2 x 2 with Axle Hole
×2
Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole
×4
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×4
Brick Sloped 30° 1 x 2 x 2/3
×8
Brick Sloped 33° 3 x 2
×7
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×1
Brick Sloped 45° 2 x 1 with Bottom Pin
×1
Brick Sloped 45° 2 x 4
×2
Brick Sloped 65° 2 x 1 x 2
×8
Brick Sloped 65° 2 x 2 x 2 with Bottom Tube
×8
Brick Sloped Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection
×6
Brick Sloped Inverted 45° 2 x 1
×2
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
×2
Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed
×1
Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]
×8
Brick Special 1 x 1 with Handle
×2
Brick Special 1 x 1 with Headlight
×3
Brick Special 1 x 1 with Stud on 1 Side
×2
Brick Special 1 x 2 with 2 Pins, Round Pin Holes
×5
Brick Special 1 x 2 with 2 Studs on 1 Side
×2
Brick Special 1 x 2 with Masonry Brick Profile
×5
Brick Special 1 x 2 with Studs on 2 Sides
×3
Brick Special 1 x 2 with Vertical Clip [Open O Clip]
×1
Brick Special 1 x 4 with Groove
×6
Brick Special 2 x 2 with 2 Pins and Axle Hole
×4
Brick Special 2 x 2 with Pin and Axle Hole
×2
Brick Wedged 2 x 2 Facet
×16
Brick Wedged 4 x 4 Facet
×4
Brick Wedged, Angled 3 x 2 Left
×2
Brick Wedged, Angled 3 x 2 Right
×2
Cone 1 x 1 [Top Groove]
×7
Cone 2 x 2 x 2, Open Stud
×4
Dish 6 x 6 Inverted, Radar / Webbed [Anti-studs at 90°]
×4
Engine Centre - Smooth Large
×2
Equipment Hose Nozzle / Gun with Side String Hole Simplified
×2
Flag 2 x 2 Square, Flat Clip Edge [Thick Clips]
×6
Handlebars
×2
Handlebars with Angular Handles
×1
Hinge Brick 1 x 2 Top Plate Thin
×1
Hinge Brick 1 x 4 [Lower]
×2
Hinge Brick 1 x 4 [Upper]
×2
Hinge Brick 2 x 2 Top Plate Thin
×5
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends
×2
Hinge Plate 1 x 2 Locking with 2 Fingers on Side, 9 Teeth
×9
Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]
×8
Hinge Plate 2 x 2 Locking with 1 Finger on Top
×2
Hinge Plate 2 x 4 with Pin Hole with 3 Holes - Top
×7
Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes
×6
Launcher, Brick Special 1 x 4 with Inside Clips (Disk Shooter) with Recessed Center 2 Studs
×12
Launcher, Weapon Gun / Blaster / Shooter Mini
×3
Lever Small Base with Black Lever
×2
Panel 1 x 1 x 1 Corner
×1
Panel 1 x 2 x 1 [Square Corners]
×2
Panel 1 x 4 x 2 with Side Supports - Hollow Studs
×1
Plate 1 x 10
×2
Plate 1 x 12
×2
Plate 1 x 2
×64
Plate 1 x 3
×6
Plate 1 x 4
×12
Plate 1 x 6
×9
Plate 2 x 16
×1
Plate 2 x 2
×1
Plate 2 x 2 Corner
×8
Plate 2 x 3
×10
Plate 2 x 4
×22
Plate 2 x 6
×2
Plate 2 x 8
×2
Plate 4 x 10
×2
Plate 4 x 12
×2
Plate 4 x 6
×2
Plate 6 x 6
×5
Plate Round 1 x 1 with Solid Stud
Also in Flat Silver
×12
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×15
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
×10
Plate Round 6 x 6 with Hole
×1
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
×2
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
×12
Plate Special 1 x 2 5.9mm Centre Side Towball Socket
×3
Plate Special 1 x 2 5.9mm Towball Socket
×2
Plate Special 1 x 2 Side Handle [Free Ends]
×6
Plate Special 1 x 2 [Side Handle Closed Ends]
×8
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×2
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×4
Plate Special 1 x 2 with Clip Horizontal on End
×8
Plate Special 1 x 2 with Clip Horizontal on Side
×14
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
×4
Plate Special 1 x 2 with Door Rail
×6
Plate Special 1 x 2 with Handle on End [Closed Ends]
×6
Plate Special 1 x 2 with Pin Hole Underneath
×8
Plate Special 1 x 2, Top Clip [Split]
×10
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
×3
Plate Special 1 x 4 with Towball Socket, Flattened
×1
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
×6
Plate Special 2 x 2 with 2 Pin Holes
×8
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
×2
Plate Special 2 x 2 with Pin on Bottom
×2
Plate Special 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center
×1
Plate Special 2 x 2 with Wheels Holder Wide
×1
Plate Special 2 x 2 with Wheels Holder Wide - Technic Pins
×1
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]
×24
Plate Special 4 x 4 with 2 x 2 Opening
×5
Pneumatic T-Piece (T Bar) [New Style]
×4
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
×6
Technic Axle 3
×36
Technic Axle 5
×14
Technic Axle 7
×4
Technic Axle Connector Hub with 3 Axles at 120°
×6
Technic Axle Connector Smooth [with x Hole + Orientation]
×2
Technic Axle Connector with Axle Hole
×11
Technic Axle Towball
×12
Technic Axle and Pin Connector Angled #1
×5
Technic Axle and Pin Connector Angled #2 - 180°
×3
Technic Axle and Pin Connector Angled #3 - 157.5°
×7
Technic Axle and Pin Connector Perpendicular
×2
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole
×2
Technic Axle and Pin Connector Perpendicular Double 4L
×1
Technic Axle and Pin Connector Perpendicular Triple
×2
Technic Beam 1 x 2 Thick
×2
Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole
×8
Technic Beam 1 x 3 Thick
×6
Technic Beam 1 x 5 Thin
×2
Technic Beam 1 x 7 Thick
×6
Technic Beam 1 x 9 Thick
×2
Technic Beam 3 x 0.5 Liftarm with Boss and Pin / Crank
×2
Technic Beam 3 x 3 L-Shape Thin
×8
Technic Beam 3 x 5 L-Shape Thick
×4
Technic Beam 3 x 5 Thick [90° Offset Centre Beam Holes]
×1
Technic Brick 1 x 1 with Pin Hole
×1
Technic Brick 1 x 10 [9 Pin Holes]
×2
Technic Brick 1 x 2 [1 Pin Hole]
×16
Technic Brick 1 x 2 [2 Pin Holes]
×9
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
×6
Technic Brick 1 x 8 [7 Pin Holes]
×6
Technic Brick 4 x 4 with 2 x 2 Opening
×2
Technic Brick 4 x 6 with 2 x 4 Opening
×2
Technic Bush
×39
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
×28
Technic Driving Ring Extension, 4 Ridges
×10
Technic Gear 16 Tooth Reinforced [New Style]
×4
Technic Gear 20 Tooth Bevel with Pin Hole
×2
Technic Pin 1/2 with 2L Bar Extension
×39
Technic Pin 1/2 without Friction Ridges
×19
Technic Pin Connector Hub Perpendicular 3 x 3 Bent with 4 Pins (Pin Ridges Across Part)
×6
Technic Pin Connector Hub Perpendicular 3L with 4 Pins
×4
Technic Pin Connector Hub with 2 Pins with Friction Ridges Lengthwise [Big Squared Pin Holes]
×2
Technic Pin Connector Perpendicular 2 x 2 Bent
×1
Technic Pin Connector Perpendicular Long
×4
Technic Pin Connector Round [Slotted]
×3
Technic Pin Double with Axle Hole
×2
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]
×11
Technic Pin without Friction Ridges Lengthwise
×41
Technic Plate 2 x 4 [3 Holes]
×1
Technic Plate 2 x 6 [5 Holes]
×12
Technic Rotation Joint Disk with Pin and 3L Beam Thick
×8
Technic Turntable Small Top
×2
Technic Worm Gear
×1
Tile 1 x 1 with Groove
×2
Tile 1 x 2 with Groove
×1
Tile 1 x 8 with Groove
×5
Tile 2 x 2 Corner
×2
Tile 2 x 2 with Groove
×2
Tile Round 1 x 1
Also in Flat Silver
×2
Tile Special 1 x 1 with Clip with Rounded Edges
×6
Tile Special 1 x 1 with Clip with Rounded Tips
×2
Tile Special 1 x 2 Grille with Bottom Groove
Also in Flat Silver
×3
Tile Special 1 x 2 with Handle
×1
Weapon Lightsaber Hilt with Bottom Ring
×5
Weapon Spike Flexible 3.5L
×5
Wedge Plate 3 x 2 Left
×1
Wedge Plate 3 x 2 Right
×1
Wedge Plate 3 x 3 Cut Corner
×2
Wheel 11 x 12 with Hole Notched for Wheels Holder Pin
×2
Wheel 11 x 8 with Center Groove
×22
Wheel 18 x 14 with Pin Hole, Fake Bolts and Shallow Spokes
×13
Wheel 18 x 8 with Fake Bolts and Deep Spokes with Inner Ring
×3
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
×3
Wheel 30 x 14
×7
Wheel 30.4 x 20 without Pinholes, with Reinforced Rim
×2
Wheel Holder, Plate, Round 2 x 2 Thin with Clips
×1
Arm Mechanical with 2 Clips [Battle Droid]
Also in Black
×1
Bar 1 x 4 x 3 [End Tabs]
Also in Black
×1
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip]
×4
Bar Holder with Clip
Also in Black
×10
Bracket 1 x 2 - 1 x 2 Inverted
Also in Black
×13
Bracket 1 x 2 - 2 x 2
Also in Black
×6
Bracket 3 x 2 x 1 1/3 with Pin Bottom
×3
Brick 1 x 2
Also in Black
×3
Brick 1 x 2 x 2 with Inside Stud Holder
×2
Brick 1 x 2 x 5 with Hollow Studs
×1
Brick 1 x 3
×2
Brick 1 x 4
×1
Brick 1 x 6
Also in Black
×1
Brick 2 x 2
Also in Black
×4
Brick 2 x 3
Also in Black
×6
Brick 2 x 4
Also in Black
×5
Brick 2 x 6
×2
Brick Arch 1 x 6 Raised Arch
×4
Brick Curved 1 x 2 x 1 1/3 with Curved Top
Also in Black
×13
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in BlackAlso in Flat Silver
×2
Brick Curved 2 x 2 x 2/3
Also in Flat SilverAlso in Black
×3
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
×2
Brick Curved 2 x 2, Two Top Studs
×1
Brick Curved 3 x 1 No Studs
×2
Brick Curved 4 x 1 Double, No Studs
Also in Black
×10
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Also in Flat SilverAlso in Black
×12
Brick Curved 5 x 8 x 2/3, 4 Studs on Top
×1
Brick Curved 6 x 1
×4
Brick Curved Inverted 6 x 1
×4
Brick Round 4 x 4 with 4 Side Pin Holes and Center Axle Hole
×2
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
Also in Black
×5
Brick Sloped 30° 1 x 2 x 2/3
Also in Black
×4
Brick Sloped 33° 3 x 2
×2
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
Also in Black
×1
Brick Sloped 45° 2 x 1 with Bottom Pin
×2
Brick Sloped 45° 2 x 3
×4
Brick Sloped 65° 2 x 2 x 2 with Bottom Tube
Also in Black
×4
Brick Sloped 75° 2 x 1 x 3 with Hollow Stud
×2
Brick Sloped Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection
×2
Brick Sloped Inverted 45° 2 x 1
Also in Black
×4
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
Also in Black
×2
Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed
×3
Brick Sloped Inverted 45° 4 x 4 Double with 4 x 2 Recessed, 2 Holes
×8
Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed
Also in Black
×5
Brick Sloped Inverted 45° 6 x 4 Double with 4 x 4 Recessed and 3 Holes
×8
Brick Special 1 x 1 Studs on 4 Sides
Also in Black
×3
Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]
Also in Black
×2
Brick Special 1 x 1 with Studs on 2 Sides
Also in Black
×2
Brick Special 1 x 2 with 2 Pins, Round Pin Holes
×10
Brick Special 1 x 2 with Grille
Also in Black
×8
Brick Special 1 x 2 with Masonry Brick Profile
×3
Brick Special 1 x 2 with Pin
×4
Brick Special 1 x 2 with Vertical Clip [Thick U Clip]
×2
Brick Special 1 x 4 with 4 Studs on One Side
×8
Brick Special 2 x 2 with 2 Pins and Axle Hole
×5
Brick Special 2 x 2 with Grooves and Axle Hole
×9
Brick Special 2 x 2 with Pin and Axle Hole
×6
Brick Special 2 x 4 x 1 1/3 with Pin Holes and 2 x 2 Recessed
×1
Brick Special 2 x 4, with 2 x 2 Brick with Top Pin and 1 x 2 Side Plates
×2
Brick Wedged, Curved 6 x 2 Left, Inner Ridges
×1
Brick Wedged, Curved 6 x 2 Right, Inner Ridges
×1
Brick Wedged, Sloped Inverted 4 x 4 Triple [4 Connections between Front Studs]
×1
Cone 1 x 1 [Top Groove]
Also in Black
×1
Cone 2 x 2 x 2, Open Stud
×2
Cone 4 x 4 x 2, Axle Hole [Plain]
×2
Dish 2 x 2 Inverted [Radar]
Also in Black
×2
Dish 3 x 3 Inverted [Radar]
×2
Handlebars
Also in Black
×9
Helicopter Landing Ski 1 x 6 with Pin Hole
×6
Hinge Brick 1 x 4 [Lower]
×1
Hinge Brick 1 x 4 [Upper]
×1
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole On Ends
Also in Black
×6
Hinge Cylinder 1 x 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth
Also in Black
×1
Hinge Plate 1 x 2 Locking with 1 Finger On Top
×10
Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove
×3
Hinge Plate 2 x 4 with Articulated Joint - Female
×2
Hinge Plate 2 x 4 with Articulated Joint - Male
×2
Jet Engine Fan with 10 Blades and Technic Pin
×2
Large Figure Skeletal, Joint Extender [High Friction]
×1
Launcher Trigger, Weapon Gun Trigger
×9
Launcher, Brick Special 1 x 4 Spring Shooter with Light Bluish Gray Top
×4
Panel 1 x 1 x 1 Corner
×1
Panel 1 x 4 x 3 [Side Supports / Hollow Studs]
×1
Panel 3 x 3 x 6 Corner Wall without Bottom Indentations
×2
Plate 1 x 10
Also in Black
×2
Plate 1 x 2
Also in Black
×10
Plate 1 x 3
Also in Black
×14
Plate 1 x 4
Also in Black
×2
Plate 1 x 6
×8
Plate 1 x 8
Also in Black
×3
Plate 2 x 10
Also in Black
×3
Plate 2 x 12
Also in Black
×1
Plate 2 x 14
Also in Black
×1
Plate 2 x 16
×1
Plate 2 x 2
Also in Black
×21
Plate 2 x 3
Also in Black
×13
Plate 2 x 4
Also in Black
×7
Plate 2 x 6
Also in Black
×12
Plate 2 x 8
×10
Plate 3 x 3
×2
Plate 4 x 10
Also in Black
×1
Plate 4 x 4
Also in Black
×6
Plate 4 x 4 Corner
×8
Plate 4 x 6
Also in Black
×2
Plate 6 x 12
×2
Plate 6 x 16
Also in Black
×1
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Also in Black
×9
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
Also in Black
×11
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
Also in Black
×9
Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]
Also in Black
×4
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
Also in Black
×18
Plate Special 1 x 2 Side Handle [Free Ends]
Also in Black
×3
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×4
Plate Special 1 x 2 with 5.9mm Centre Side Towball
×4
Plate Special 1 x 2 with 5.9mm Towball Socket and Towball
×2
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
Also in Black
×8
Plate Special 1 x 2 with Door Rail
Also in Black
×1
Plate Special 1 x 2 with Handle on End [Closed Ends]
Also in Black
×12
Plate Special 1 x 2 with Handles [Flat Ends / Low Attachment]
Also in Black
×2
Plate Special 1 x 2 with Pin Hole on Top
×37
Plate Special 1 x 4 Offset with Bar Holes
×1
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
Also in Black
×4
Plate Special 1 x 8 with Door Rail
×2
Plate Special 2 x 16 with Angled Side Extensions and Hole (Rotor Blade)
×6
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
Also in Black
×10
Plate Special 2 x 2 with 2 Pins
×22
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
Also in Black
×2
Plate Special 2 x 4 with Pins
×1
Plate Special 3 x 2 with Rounded End, Hole
Also in Black
×4
Pneumatic Hose Connector with Axle Connector
×14
Tail Shuttle - Small
Also in Black
×1
Technic Axle 1.5 with Perpendicular Axle Connector (Technic Pole Reverser Handle)
×11
Technic Axle 4 with Stop
×35
Technic Axle 5.5 with Stop [Rounded Short End]
×16
Technic Axle 8 with Stop
×10
Technic Axle Connector 2 x 3 with Ball Socket, Open Lower Axle Holes
Also in Black
×4
Technic Axle Connector Smooth [with x Hole + Orientation]
Also in Black
×11
Technic Axle Pin 3L with Friction Ridges Lengthwise and 1L Axle
×21
Technic Axle and Pin Connector Angled #1
Also in Black
×2
Technic Axle and Pin Connector Angled #4 - 135°
×3
Technic Axle and Pin Connector Perpendicular
×4
Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
×8
Technic Axle and Pin Connector Perpendicular Double
×4
Technic Axle and Pin Connector Perpendicular Double Split
×10
Technic Beam 1 x 11 Thick
Also in Black
×4
Technic Beam 1 x 11.5 Double Bent Thick
×2
Technic Beam 1 x 15 Thick
Also in Black
×2
Technic Beam 1 x 2 Thick with Pin Hole and Axle Hole
Also in Black
×6
Technic Beam 1 x 2 Thin
×2
Technic Beam 1 x 2 with Ball Joint Angled
×7
Technic Beam 1 x 3 Thick
×8
Technic Beam 1 x 3 with Ball Joint in Middle
×2
Technic Beam 1 x 4 Thin
×12
Technic Beam 1 x 5 Thick
Also in Black
×2
Technic Beam 1 x 7 Thick
Also in Black
×8
Technic Beam 1 x 9 Bent (6 - 4) Thick
×4
Technic Beam 1 x 9 Bent (7 - 3) Thick
Also in Black
×6
Technic Beam 1 x 9 Thick
Also in Black
×4
Technic Beam 2 x 4 L-Shape Thick
Also in Black
×10
Technic Beam 3 x 3 T-Shape Thick
Also in Black
×5
Technic Beam 3 x 5 L-Shape Thick
Also in Black
×4
Technic Brick 1 x 1 with Pin Hole
Also in Black
×15
Technic Brick 1 x 12 [11 Pin Holes]
Also in Black
×16
Technic Brick 1 x 16 [15 Pin Holes]
Also in Black
×2
Technic Brick 1 x 2 [1 Pin Hole]
Also in Black
×18
Technic Brick 1 x 2 [2 Pin Holes]
Also in Black
×23
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
Also in Black
×21
Technic Brick 1 x 2 with Hole and Dual Beam Extensions
×4
Technic Brick 1 x 4 [3 Pin Holes]
Also in Black
×11
Technic Brick 1 x 6 [5 Pin Holes]
Also in Black
×10
Technic Brick Special 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball
×18
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]
×4
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Vertical Side]
×4
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket
×6
Technic Gear 24 Tooth [New Style with Single Axle Hole]
×3
Technic Gear 8 Tooth [Reinforced]
×2
Technic Link 1 x 6 without Stoppers
Also in Black
×2
Technic Link Tread Wide with Two Pin Holes, Reinforced
Also in Black
×22
Technic Pin Connector Hub with 2 Perpendicular Axles
×8
Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]
Also in Black
×3
Technic Pin Connector Round 1L [Beam]
×23
Technic Reel 3 x 2
×2
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction
Also in Black
×10
Technic Rotation Joint Disk with Pin Hole and 3L Beam Thick
×8
Technic Steering / CV Joint Axle
×2
Tile 1 x 2 with Joystick and Vehicle Control Panel Print
×1
Tile 1 x 4 with Groove
Also in Black
×5
Tile 1 x 4 with Train Controls Print
×1
Tile 1 x 6 with Groove
×6
Tile 1 x 8 with Groove
Also in Black
×2
Tile 2 x 2 with Groove
Also in Black
×3
Tile 2 x 4 with Groove
×1
Tile Round 2 x 2 with Bottom Stud Holder
Also in Black
×6
Tile Special 1 x 1 with Clip with Rounded Edges
×5
Tile Special 1 x 2 Grille with Bottom Groove
Also in Flat SilverAlso in Black
×12
Tile Special 1 x 2 with Handle
Also in Black
×2
Tile Special 2 x 2 Inverted
×13
Tile Special 2 x 2 Inverted with 4 Orange, Red and Yellow Rounded Squares Print
×4
Tile Special 2 x 2 with Top Pin
Also in Black
×1
Tile Special Round 2 x 2 with Hole
×17
Torso Mechanical, Battle Droid
×1
Weapon Gun / Pistol Two Barrel, 10 Ribs
Also in Black
×2
Weapon Pike / Spear [4 Side Blades]
×2
Wedge Plate 3 x 3 Cut Corner
Also in Black
×2
Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]
×1
Wedge Plate 3 x 6 Cut Corners
Also in Black
×1
Wedge Plate 4 x 4 Cut Corner
×2
Wedge Plate 6 x 3 Left
×5
Wedge Plate 6 x 3 Right
×5
Wedge Plate 8 x 3, 22° Left
×6
Wedge Plate 8 x 3, 22° Right
×6
Wheel 31 x 15 Technic, 7 Pin Holes
×2
Wheel Centre Small with Stub Axles (Pulley Wheel)
×1
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
×8
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
×28
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
×42
Animal Body Part, Skull, Cattle
×2
Arm Skeleton [Bent / 2 Clips]
×1
Bar 4L (Lightsaber Blade / Wand)
×2
Bar 6L with Stop Ring
×1
Bracket 1 x 2 - 1 x 2
×4
Bracket 1 x 2 - 1 x 4 [Rounded Corners]
×1
Bracket 1 x 2 - 2 x 2
×12
Brick 1 x 12
×6
Brick 1 x 2
×3
Brick 1 x 2 x 2 with Inside Stud Holder
×2
Brick 1 x 3
×7
Brick 1 x 4
×2
Brick 1 x 6
×2
Brick 1 x 8
×2
Brick 2 x 2
×1
Brick 2 x 2 Corner
×2
Brick 2 x 4
×9
Brick Arch 1 x 12 x 3 Raised Arch
×3
Brick Arch 1 x 3 x 2
×8
Brick Arch 1 x 5 x 4 [Continuous Bow, Raised Underside Cross Supports]
×4
Brick Curved 1 x 2 x 1 1/3 with Curved Top
×2
Brick Curved 1 x 4 x 1 1/3 No Studs
×2
Brick Curved 1 x 5 x 4 Inverted
×2
Brick Curved 10 x 1 [Symmetric Inside Ridges]
×6
Brick Curved 2 x 1 No Studs [1/2 Bow]
×20
Brick Curved 2 x 2 x 2/3
×17
Brick Curved 4 x 1 Double, No Studs
×5
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×3
Brick Curved 6 x 1
×2
Brick Curved Inverted 6 x 1
×2
Brick Round 2 x 2 Dome Top, Hollow Stud
×1
Brick Round 4 x 4 Centre Hole
×3
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×1
Brick Sloped 18° 4 x 1
×3
Brick Sloped 18° 4 x 2
×2
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×3
Brick Sloped 30° 1 x 2 x 2/3
×12
Brick Sloped 33° 3 x 1
×4
Brick Sloped 33° 3 x 4
×2
Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder
×1
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×3
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
×18
Brick Sloped 45° 2 x 1 with Bottom Pin
×4
Brick Sloped 45° 2 x 2
×2
Brick Sloped 75° 2 x 2 x 3 [Solid Studs]
×1
Brick Sloped Inverted 33° 3 x 1 with Internal Stopper and No Front Stud Connection
×2
Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin
×3
Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed
×1
Brick Sloped Inverted 45° 6 x 1 Double with 1 x 4 Recessed
×2
Brick Special 1 x 1 Studs on 4 Sides
×1
Brick Special 1 x 1 with Stud on 1 Side
×4
Brick Special 1 x 1 x 3 with 2 Clips Vertical [Hollow Stud, Open O Clips]
×2
Brick Special 1 x 2 with Handle
×1
Brick Special 1 x 2 x 5 with Groove
×6
Brick Special 1 x 4 with 4 Studs on One Side
×3
Brick Wedged 3 x 4 [Stud Notches]
×1
Brick Wedged, Angled 4 x 2 Left
×3
Brick Wedged, Angled 4 x 2 Right
×3
Brick Wedged, Curved 2 x 3 x 2/3 Two Studs, Wing End
×2
Brick Wedged, Curved 4 x 3 No Studs [Plain]
×4
Brick Wedged, Curved 4 x 4 No Top Studs
×1
Brick Wedged, Sloped 4 x 4 Triple, Stud Notches
×4
Brick Wedged, Sloped 45° 2 x 2 Corner
×1
Cone 1 x 1 [Top Groove]
×3
Cone 2 x 2 x 2, Open Stud
×1
Creature Body Part, Barb Large (Claw, Talon) with Clip
×8
Creature Body Part, Wing 9L with Stylized Feathers
×2
Hinge Brick 1 x 2 Base
×4
Hinge Plate 1 x 4 Swivel Top / Base - Solid Clip [Complete Assembly]
×5
Large Figure Hand Cover, Armor with Handles for Clips
×1
Panel 1 x 2 x 1 with Rounded Corners and Central Divider
×1
Plate 1 x 2
Also in Trans-Clear
×15
Plate 1 x 4
×26
Plate 1 x 6
×9
Plate 1 x 8
×4
Plate 2 x 10
×3
Plate 2 x 12
×1
Plate 2 x 2
×6
Plate 2 x 3
×13
Plate 2 x 4
×17
Plate 2 x 6
×6
Plate 2 x 8
×2
Plate 4 x 12
×1
Plate 4 x 4
×4
Plate 4 x 6
×1
Plate Round 1 x 1 with Solid Stud
Also in Trans-Clear
×11
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×2
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
×2
Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]
×10
Plate Special 1 x 1 with Tooth
×22
Plate Special 1 x 1 with Vertical Tooth
×21
Plate Special 1 x 2 Side Handle [Free Ends]
×3
Plate Special 1 x 2 [Side Handle Closed Ends]
×6
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×2
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
×6
Plate Special 1 x 2 with Clip Horizontal on End
×9
Plate Special 1 x 2 with Clip Horizontal on Side
×1
Plate Special 1 x 2 with Handle on End [Closed Ends]
×7
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
×17
Plate Special 1 x 8 with Door Rail
×2
Plate Special 2 x 2 with 1 Pin Hole [Split Underside Ribs]
×4
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
×2
Plate Special 2 x 2 x 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]
×2
Plate Special 4 x 4 with Clips Horizontal (thick open O clips)
×2
Plate Special 4 x 4, Studs on One Edge Plain]
×2
Plate Special 4 x 6 with Trap Door Hinge [Long Pins]
×1
Plate Special 6 x 8 Trap Door Frame Horizontal [Long Pin Holders]
×1
Plate Special Round 2 x 2 with Center Stud (Jumper Plate)
×1
Rubber Belt Small [15mm ID] [Round Cross Section]
×3
String with End Studs and Minifig Grips 21L
×1
Tap 1 x 1 without Hole in Spout
×1
Technic Axle and Pin Connector Angled #2 - 180°
×1
Technic Beam 1 x 5 Thick
×2
Technic Beam 1 x 9 Thick
×2
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
×6
Technic Brick 1 x 4 [3 Pin Holes]
×9
Technic Brick 1 x 6 [5 Pin Holes]
×1
Technic Tooth 1 x 3 with Axle Hole [Rounded Underside]
×5
Tile 1 x 8 with Groove
×3
Tile 2 x 4 with Groove
×4
Tile Round 2 x 2 with Bottom Stud Holder
×2
Tile Round 2 x 2 with Ice Print
×15
Tile Special 1 x 1 with Clip with Rounded Tips
×2
Tile Special 1 x 2 with Two Vertical Teeth / Tooth
×8
Tile Special 2 x 2 Inverted
×5
Tile Special 2 x 2 with Top Pin
×2
Weapon Lightsaber Hilt with Bottom Ring
×2
Wedge Plate 2 x 4
×3
Wedge Plate 3 x 2 Left
×1
Wedge Plate 3 x 2 Right
×1
Wedge Plate 3 x 3 Cut Corner
×1
Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]
×2
Wedge Plate 3 x 6 Cut Corners
×3
Wedge Plate 4 x 6 Cut Corners
×2
Wedge Plate 8 x 3, 22° Left
×1
Wedge Plate 8 x 3, 22° Right
×1
Wheel 30 x 14
×4
Bar 4L (Lightsaber Blade / Wand)
×19
Brick 1 x 2 x 5 without Side Supports
×2
Brick Curved 2 x 2 with Lip, No Studs
×24
Brick Curved 6 x 1
×22
Brick Round 1 x 1 Open Stud
×62
Brick Round 2 x 2 with Axle Hole
×12
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×21
Creature Body Part, Barb Large (Claw, Talon) with Clip
×40
Dish 2 x 2 Inverted [Radar]
×2
Insect Body Part, Leg / Tail / Claw / Rib with Axle
×37
Large Figure Skeletal, Limb with Ball Joint and Ball Socket, Short
×1
Large Figure Weapon Claw, with Clip
×18
Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes
×2
Panel 1 x 2 x 1 [Rounded Corners]
×1
Panel 1 x 2 x 2 [Side Supports / Hollow Studs]
×19
Panel 1 x 4 x 3 [Side Supports / Hollow Studs]
×1
Plant, Leaves 6 x 5 Swordleaf with Clip [Thick Open O Clip]
×2
Plate 1 x 1
×24
Plate 1 x 2
×85
Plate Round 1 x 1 with Solid Stud
×22
Projectile, Large Figure Weapon, Zamor Sphere / Ball with Marbled White Pattern
×5
Rock 1 x 1 Crystal 4 Point
×25
Rock 1 x 1 Jewel / Gem 24 Facet
×25
Rock Panel 2 x 4 x 3 with Fractures (Chima Icecage)
×7
Rock Panel 2 x 4 x 6
×1
Shield Ovoid with Grip [Plain]
×3
Technic Beam 1 x 7 Bent (4 - 4) Thick
×6
Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole
×13
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top]
×6
Technic Brick Special 2 x 2 with Pin Hole, Rotation Joint Socket
×6
Tile 1 x 2 with Groove
×7
Tile 1 x 4 with Groove
×48
Tile Round 1 x 1
×47
Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]
×1
Tool Saw with Handle and Tooth
×7
Wave / Flame Rounded with Base Pegs
×2
Weapon Axe Head, Clip-on (Viking) [Thick Clip]
×7
Weapon Sword Double Blade Serrated with Bar Holder (Chi Sword)
×6
Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom
×2
Windscreen 4 x 4 x 4 2/3 with Handle
×2
Windscreen 8 x 6 x 2 Curved
×8
Box 2 x 2 x 2 [Hollow Studs]
×1
Bracket 1 x 2 - 1 x 2 Inverted
×3
Bracket 1 x 2 - 1 x 4 [Rounded Corners]
×16
Bracket 1 x 2 - 2 x 2
×4
Bracket 1 x 2 - 2 x 2 Inverted
×8
Brick 1 x 1
×2
Brick 2 x 2
×5
Brick 2 x 4
×8
Brick Arch 1 x 3 x 2
×2
Brick Curved 2 x 1 No Studs [1/2 Bow]
×4
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
×1
Brick Curved 3 x 1 No Studs
×8
Brick Curved 4 x 1 Double, No Studs with Flames Print
×2
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×1
Brick Curved 4 x 2 No Studs
×1
Brick Curved Inverted 4 x 1
×8
Brick Round 2 x 2 [Grill]
×4
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×9
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Trans-Red
×4
Brick Sloped 30° 1 x 2 x 2/3
×5
Brick Sloped 33° 2 x 2 Double
×1
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
×3
Brick Sloped 45° 2 x 2
×1
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
×5
Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed
×1
Brick Special 1 x 2 with 2 Studs on 1 Side
×2
Brick Special 1 x 2 with Pin
×3
Brick Wedged 3 x 4 [Stud Notches]
×1
Brick Wedged, Curved 1 x 2 x 2/3 No Studs, Wing End
×1
Brick Wedged, Curved 4 x 4 No Top Studs
×2
Brick Wedged, Curved 6 x 4 Triple
×4
Brick Wedged, Curved Inverted 6 x 4
×1
Brick Wedged, Sloped 4 x 2 Triple Left
×1
Brick Wedged, Sloped 4 x 2 Triple Right
×1
Flag 2 x 2 Square, Flat Clip Edge [Thick Clips]
×2
Hinge Brick 1 x 2 Base
×1
Hinge Brick 2 x 2 Top Plate Thin
×2
Large Figure Foot, with Ball Socket 3 x 5 x 2
×2
Lever Small Base with Black Lever
×2
Panel 1 x 4 x 1 with Rounded Corners [Thin Wall]
×2
Plate 1 x 1
×2
Plate 1 x 10
×3
Plate 1 x 2
Also in Trans-Red
×4
Plate 1 x 4
×4
Plate 1 x 6
×2
Plate 2 x 10
×2
Plate 2 x 12
×2
Plate 2 x 2
×9
Plate 2 x 2 Corner
×6
Plate 2 x 3
×6
Plate 2 x 4
×8
Plate 2 x 6
×4
Plate 4 x 4
×1
Plate Round 1 x 1 with Solid Stud
Also in Trans-Red
×15
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×4
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
×1
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
×10
Plate Special 1 x 2 Side Handle [Free Ends]
×9
Plate Special 1 x 2 with Bar Up [Horizontal Arm 5mm]
×4
Plate Special 1 x 2 with Clip Horizontal on End
×8
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
×3
Plate Special 1 x 2 with Handle on End [Closed Ends]
×4
Plate Special 1 x 2, Top Clip [Split]
×4
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
×1
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
×1
Plate Special 2 x 2 with 2 Pin Holes
×6
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
×5
Technic Axle 2 Notched
×47
Technic Axle Connector Smooth [with x Hole + Orientation]
×11
Technic Axle Connector with Axle Hole
×14
Technic Axle and Pin Connector Angled #1
×5
Technic Axle and Pin Connector Angled #4 - 135°
×4
Technic Axle and Pin Connector Perpendicular
×12
Technic Axle and Pin Connector Perpendicular 3L with 2 Pin Holes
×4
Technic Axle and Pin Connector Perpendicular 3L with Centre Pin Hole
×2
Technic Axle and Pin Connector Perpendicular Double
×2
Technic Ball Joint
×1
Technic Beam 1 x 11 Thick
×5
Technic Beam 1 x 11.5 Double Bent Thick
×2
Technic Beam 1 x 13 Thick
×4
Technic Beam 1 x 15 Thick
×4
Technic Beam 1 x 2 Thick
×4
Technic Beam 1 x 2 Thin
×8
Technic Beam 1 x 3 Thick
×1
Technic Beam 1 x 5 Thick
×2
Technic Beam 1 x 7 Bent (4 - 4) Thick
×3
Technic Beam 1 x 9 Bent (7 - 3) Thick
×2
Technic Beam 2 x 4 L-Shape Thick
×2
Technic Beam 3 x 5 L-Shape Thick
×4
Technic Brick 1 x 1 with Pin Hole
×4
Technic Brick 1 x 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
×5
Technic Brick 1 x 2 with Axle Hole Type 2 [X Opening]
×3
Technic Brick 1 x 4 [3 Pin Holes]
×9
Technic Brick 1 x 8 [7 Pin Holes]
×4
Technic Bush
×21
Technic Pin Connector Plate 1 x 2 x 1 2/3 [Two Holes On Top]
×2
Technic Pin Connector Round [Slotted]
×1
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole]
×26
Technic Plate 2 x 4 [3 Holes]
×4
Technic Plate 2 x 6 [5 Holes]
×4
Technic Rubber Belt Medium [24mm ID] [Round Cross Section]
×4
Technic Tread Large [36 Links]
×2
Tile 1 x 1 with Groove
×1
Tile 1 x 2 with Groove
Also in Trans-Red
×2
Tile 1 x 3
×4
Tile 1 x 6 with Groove
×4
Tile 2 x 2 with Groove
×2
Tile Round 2 x 2 with Bottom Stud Holder
×4
Tile Round 2 x 2 with Fire Print
×16
Tile Special 1 x 1 with Clip with Rounded Edges
×2
Tile Special 1 x 1 with Clip with Rounded Tips
×8
Tile Special 1 x 2 with Handle
×1
Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]
×1
Tile Special Round 2 x 2 with Hole
×2
Wave / Flame Rounded Double with Axle with Marbled Bright Light Orange Pattern
×20
Weapon Spike Flexible 3.5L
×1
Wedge Plate 2 x 4
×2
Wedge Plate 4 x 2 Left
×1
Wedge Plate 4 x 2 Right
×1
Wedge Plate 8 x 3, 22° Left
×1
Wedge Plate 8 x 3, 22° Right
×1
Window 1 x 2 x 2 Flat Front
×1
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Large
×7
Bar 1L with Top Stud and Two Side Studs
×5
Bar 4L (Lightsaber Blade / Wand)
×2
Bar 6L with Stop Ring
×7
Bar Holder with Clip
×2
Brick 1 x 2
×2
Brick 2 x 2
×10
Brick 2 x 3
×2
Brick 2 x 4
×6
Brick 2 x 6
×2
Brick Curved 1 x 2 x 1 1/3 with Curved Top
×38
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in Dark Brown
×6
Brick Curved 2 x 2 with Lip, No Studs
×2
Brick Curved 4 x 1 Double, No Studs
×5
Brick Round 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs
×2
Brick Round 4 x 4 Centre Hole
×3
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×2
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Dark Brown
×2
Brick Sloped 33° 3 x 1
×16
Brick Sloped 33° 3 x 2
×4
Brick Sloped 45° 2 x 2
×8
Brick Sloped 75° 2 x 1 x 3 with Hollow Stud
×2
Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin
×17
Brick Sloped Inverted 45° 2 x 1
Also in Dark Brown
×18
Brick Sloped Inverted 45° 4 x 2 Double with 2 x 2 Recessed
×2
Brick Special 1 x 2 with Grille
×2
Cone 1 x 1 [Top Groove]
×4
Container Box 2 x 2 x 2 - Top Opening
×1
Large Figure Limb Cover / Claw / Spike Large with Axle
×5
Plate 1 x 1
×16
Plate 1 x 10
×2
Plate 1 x 2
Also in Dark Brown
×2
Plate 1 x 3
×6
Plate 1 x 4
×7
Plate 1 x 6
×1
Plate 2 x 10
×4
Plate 2 x 2
×29
Plate 2 x 2 Corner
×8
Plate 2 x 3
×6
Plate 2 x 4
×38
Plate 2 x 6
Also in Dark Brown
×8
Plate 2 x 8
×10
Plate 4 x 4
×3
Plate 4 x 6
×4
Plate 4 x 8
×3
Plate 6 x 8
×6
Plate Round 1 x 1 with Solid Stud
×2
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Also in Dark Brown
×2
Plate Round Corner 4 x 4
×12
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
×8
Plate Special 1 x 2 with Clip Horizontal on End
×12
Plate Special 1 x 2 with Door Rail
×3
Plate Special 2 x 4 with Pins
×2
Technic Axle Connector Hub with 4 Bars at 90°
×1
Technic Axle and Pin Connector Angled #3 - 157.5°
×4
Technic Brick 1 x 1 with Pin Hole
×2
Technic Brick 1 x 2 [1 Pin Hole]
×15
Technic Brick 1 x 4 [3 Pin Holes]
×8
Technic Link 1 x 9 Bent (6 - 4)
×2
Tile 1 x 2 with Groove
Also in Dark Brown
×8
Tile 1 x 6 with Groove
×5
Tile 1 x 8 with Groove
×2
Tile 2 x 4 with Groove
×6
Tile Round 2 x 2 with Bottom Stud Holder
×4
Tile Special 1 x 1 with Clip with Rounded Edges
×2
Tile Special 1 x 1 with Clip with Rounded Tips
×2
Tile Special 1 x 2 Grille with Bottom Groove
×3
Tile Special 1 x 2 with Handle
×1
Tile Special 2 x 3 with 2 Clips [Thick Open O Clips]
×4
Wedge Plate 4 Stud 45° Angle Plate
×8
Wedge Plate 4 x 2 Left
×6
Wedge Plate 4 x 2 Right
×6
Wedge Plate 4 x 4 Cut Corner
×2
Brick Curved 1 x 2 x 1 1/3 with Curved Top
×2
Brick Curved 3 x 1 No Studs
×2
Brick Special 1 x 4 with 4 Studs on One Side
×4
Cone 1 x 1 [Top Groove]
×1
Flag 2 x 2 Square, Flat Clip Edge [Thick Clips]
×2
Lever Small Base with Black Lever
×4
Plate 1 x 1
×8
Plate 2 x 2 Corner
×3
Plate 4 x 4
×1
Plate Round 1 x 1 with Solid Stud
×2
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×20
Plate Special 1 x 1 with Clip Vertical [Thick Open O Clip]
×8
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
×1
Technic Axle Pin with Friction Ridges Lengthwise
×108
Technic Beam 1 x 5 Thick
×2
Technic Beam 1 x 7 Thick
×4
Technic Brick 1 x 2 [1 Pin Hole]
×4
Technic Brick 1 x 6 [5 Pin Holes]
×1
Technic Pin 1/2 without Friction Ridges
×76
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
×92
Tile 2 x 4 with Groove
×3
Tile Round 1 x 1
×2
Brick Arch 1 x 4
×2
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in Reddish Brown
×40
Brick Curved 2 x 2 x 2/3
×18
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
×11
Brick Curved 3 x 1 No Studs
×16
Brick Curved 4 x 2 No Studs
×6
Brick Round Corner 6 x 6 x 2
×16
Brick Sloped 18° 4 x 1
×8
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Reddish Brown
×14
Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder
×1
Brick Sloped 45° 2 x 1 with Bottom Pin
×8
Brick Sloped Inverted 45° 2 x 1
Also in Reddish Brown
×2
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
×1
Brick Special 1 x 2 Palisade [aka Log]
×16
Brick Wedged, Curved 4 x 4 No Top Studs
×5
Brick Wedged, Curved 6 x 2 Left, Inner Ridges
×4
Brick Wedged, Curved 6 x 2 Right, Inner Ridges
×4
Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs
×2
Brick Wedged, Sloped 45° 2 x 2 Corner
×8
Brick Wedged, Sloped 6 x 8 Cutout
×3
Creature Body Part, Wing 9L with Stylized Feathers
×14
Door 1 x 4 x 6 Barred with Stud Handle
×2
Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3
×3
Flag 5 x 6 Hexagonal with C Clips
×4
Flag 5 x 6 Hexagonal with U Clips
×2
Large Figure Torso Cover, Armour with 2 Chest Holes and Ball Joint Socket
×2
Launcher, 1 x 4 with 1 x 2 Plate with Pin Hole and Bucket (Catapult)
×1
Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings
×4
Plate 1 x 2
Also in Reddish Brown
×38
Plate 1 x 8
×5
Plate 2 x 6
Also in Reddish Brown
×9
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
Also in Reddish Brown
×8
Plate Round 4 x 4 with Pin Hole
×5
Plate Special 2 x 2 with Grills
×10
Technic Brick Special 2 x 2 with Ball Socket Wide and Axle Hole
×8
Technic Brick Special 2 x 2 with Ball and Axle Hole, with 6 Holes in Ball
×2
Tile 1 x 2 with Groove
Also in Reddish Brown
×4
Vehicle Body, Wheel Arch / Mudguard 3 x 4 x 1 2/3 Low Profile, Curved Front
×5
Weapon Pike / Spear Flat End
×1
Wedge Plate 3 x 3 Cut Corner
×4
Bracket 1 x 2 - 2 x 2
×15
Brick 1 x 1
×6
Brick 1 x 2
Also in Dark Tan
×3
Brick 1 x 4
×2
Brick 1 x 8
×6
Brick 2 x 2 Corner
×4
Brick Round 2 x 2 [Grill]
×10
Brick Round Corner 4 x 4 Macaroni Wide with 3 Studs
×12
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Dark Tan
×4
Brick Sloped 30° 1 x 2 x 2/3
Also in Dark Tan
×18
Brick Sloped 45° 2 x 1 with Bottom Pin
Also in Dark Tan
×14
Brick Sloped 45° 3 x 4 Double / 33°
×1
Brick Special 1 x 2 with 2 Studs on 1 Side
×9
Flag 2 x 2 Trapezoid with Flat Area between Clips
×8
Plate 1 x 2
Also in Dark Tan
×2
Plate 1 x 4
Also in Dark Tan
×7
Plate 2 x 2 Corner
Also in Dark Tan
×7
Plate 2 x 3
×11
Plate 2 x 4
×3
Plate Round 1 x 1 with Solid Stud
×4
Plate Special 1 x 1 with Clip Light, Bar Hole [Thick Ring]
×6
Plate Special 1 x 2 Side Handle [Free Ends]
×8
Plate Special 1 x 2 [Side Handle Closed Ends]
×7
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
×14
Technic Axle Pin without Friction Ridges Lengthwise
×16
Technic Brick 1 x 1 with Pin Hole
×2
Technic Brick 1 x 2 [2 Pin Holes]
×1
Technic Gear 12 Tooth Bevel
×5
Technic Gear 20 Tooth Bevel
×2
Technic Pin 3/4
×10
Technic Pin Long without Friction Ridges
×27
Tile 1 x 1 with Groove
×2
Tile 1 x 2 with Groove
Also in Dark Tan
×4
Tile 1 x 4 with Groove
×4
Tile 1 x 8 with Groove
×4
Tile 2 x 2 with Groove
×4
Wedge Plate 3 x 3 Cut Corner
×10
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
×19
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
×28
Animal Body Part, Hand / Paw with Stud on Top, Bar on Side and 3 Bar Holders on Bottom
×10
Arm Mechanical with Clip [Thick Support]
×2
Brick Curved 2 x 1 No Studs [1/2 Bow]
Also in Dark Bluish GrayAlso in Light Bluish Gray
×4
Brick Curved 2 x 2 x 2/3
Also in Dark Bluish Gray
×11
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Also in Dark Bluish Gray
×4
Brick Round 3 x 4 x 2/3 Triple Curved with 2 Sunk Studs and Armor Plates and Grille with Vent Print
×1
Cone Jagged, Drill Tip
×2
Engine / Air Scoop 2 x 2
×1
Gorilla Fist / Hand
×2
Insect Body Part, Leg / Tail / Tentacle / Claw
×2
Plate Round 1 x 1 with Solid Stud
Also in Light Bluish Gray
×45
Plate Special 1 x 1 with Tooth
×22
Plate Special 1 x 4 with Angled Tubes
×3
Plate Special 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs
×8
Propeller 8 Blade 5 Diameter
×2
Shield Round with Stud and Raised Rim [Plain]
×3
Tile Round 1 x 1
Also in Light Bluish Gray
×9
Tile Special 1 x 2 Grille with Bottom Groove
Also in Light Bluish GrayAlso in Dark Bluish Gray
×38
Weapon Bladed Claw
×3
Weapon Hammer Head
×3
Weapon Pike / Spear Flat End
×4
Weapon Sword / Scimitar Notched Blade
×5
Weapon Sword / Shortsword Elaborate Hilt
×2
Weapon Sword Double Blade with Bar Holder [Chi Sword]
×1
Weapon Sword Scythe Blade with Clip Pommel
×3
Weapon Sword Serrated with Bar Holder
×4
Wheel Hard Plastic with Small Cleats and Flanges
×2
Brick Round 2 x 2 with Axle Hole
Also in Orange
×9
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Orange
×4
Cone 1 x 1 [Top Groove]
×43
Creature Body Part, Barb Large (Claw, Talon) with Clip
×14
Flame / Headwear Accessory Plume / Feather, Triple Point
×21
Light Cover 1 x 1 Round with Internal Bar / Bionicle Barraki Eye
×2
Plate 1 x 1
×10
Plate 1 x 2
Also in Orange
×28
Plate Round 1 x 1 with Solid Stud
×10
Plate Round 2 x 2 with Rounded Bottom [Boat Stud]
×8
Projectile, Large Figure Weapon, Zamor Sphere / Ball with Marbled Yellow Pattern
×18
Projectile, Spring Shooter Ammunition 8L Bar
×5
Rock 1 x 1 Crystal 4 Point
×24
Tile Round 1 x 1
×19
Tile Round 1 x 1 with Flame Print
×3
Wave / Flame Rounded with Base Rim
×8
Windscreen 3 x 6 x 1 Curved with 2 Circular Stud Holders in Bottom
×1
Animal / Creature Body Part, Wing Feathered
×2
Bracket 1 x 2 - 2 x 2
×8
Brick 1 x 1
×2
Brick 1 x 2
×2
Brick 1 x 4
×4
Brick 1 x 6
×3
Brick 2 x 4
×6
Brick Curved 2 x 2 x 2/3
×7
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×12
Brick Round 2 x 2 with Axle Hole
Also in Trans-Orange
×2
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×6
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Trans-Orange
×8
Brick Sloped 33° 3 x 2
×1
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×5
Brick Sloped 45° 2 x 2
×8
Brick Sloped Inverted 33° 3 x 2, Connections between Studs, Ovoid Bottom Pin
×2
Brick Sloped Inverted 45° 2 x 1
×8
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
×3
Brick Wedged, Curved 16 x 4 Triple with Inner Ridges
×1
Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs
×2
Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs with Black and White Lightning Print
×2
Brick Wedged, Sloped 4 x 2 Triple Left
×2
Brick Wedged, Sloped 4 x 2 Triple Right
×2
Brick and Axle Separator v2.0
×5
Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings
×1
Plate 1 x 2
Also in Trans-Orange
×10
Plate 1 x 4
×13
Plate 1 x 6
×14
Plate 2 x 2
×4
Plate 2 x 4
×12
Plate 2 x 6
×2
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×2
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
×4
Plate Special 1 x 2 Side Handle [Free Ends]
×2
Propeller 8 Blade 5 Diameter
×4
Technic Beam 1 x 7 Bent (4 - 4) Thick
×2
Technic Panel Fairing #21 5L Small Smooth, Side B
×1
Technic Panel Fairing #22 5L Small Smooth, Side A
×1
Technic Tooth 1 x 3 with Axle Hole [Rounded Underside]
×2
Tile 1 x 2 with Groove
×1
Tile 2 x 2 with Groove
×2
Tile 2 x 4 with Groove
×10
Tile Special 1 x 2 Grille with Bottom Groove
×4
Wedge Plate 2 x 4
×5
Wedge Plate 3 x 2 Left
×5
Wedge Plate 3 x 2 Right
×5
Wedge Plate 8 x 3, 22° Left
×2
Wedge Plate 8 x 3, 22° Right
×2
Brick 1 x 2
Also in Tan
×3
Brick 2 x 2
×1
Brick 2 x 4
×2
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×6
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Tan
×4
Brick Sloped 30° 1 x 2 x 2/3
Also in Tan
×8
Brick Sloped 33° 3 x 1
×4
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
×6
Brick Sloped 45° 2 x 1 with Bottom Pin
Also in Tan
×2
Brick Special 1 x 2 with Masonry Brick Profile
×14
Brick Wedged, Curved 4 x 4 No Top Studs
×4
Brick Wedged, Curved 6 x 2 Left, Inner Ridges
×1
Brick Wedged, Curved 6 x 2 Right, Inner Ridges
×1
Dish 8 x 8 Inverted [Radar], Solid Studs, Rounded Anti-stud Underside
×2
Plate 1 x 2
Also in Tan
×6
Plate 1 x 4
Also in Tan
×2
Plate 1 x 6
×14
Plate 2 x 2 Corner
Also in Tan
×10
Plate 2 x 6
×10
Plate Round Corner 4 x 4
×2
Plate Round Corner 6 x 6
×2
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×6
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×3
Plate Special 1 x 2 with Door Rail
×2
Plate Special 2 x 2 with Groove and Center Stud (Jumper)
×1
Technic Axle 3 with Stud
×16
Technic Axle 5 with Stop
×12
Tile 1 x 2 with Groove
Also in Tan
×2
Wedge Plate 2 x 4
×8
Wedge Plate 3 x 2 Left
×1
Wedge Plate 3 x 2 Right
×1
Wedge Plate 6 x 3 Left
×4
Wedge Plate 6 x 3 Right
×4
Wedge Plate 6 x 6 Cut Corner
×2
Wedge Plate 8 x 3, 22° Left
×7
Wedge Plate 8 x 3, 22° Right
×7
Brick Curved 3 x 1 No Studs
×2
Brick Curved 4 x 1 Double, No Studs
×12
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×7
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×6
Brick Sloped 45° 2 x 1 with Bottom Pin
×4
Brick Sloped 45° 2 x 2
×1
Brick Sloped 65° 2 x 1 x 2
×4
Brick Wedged, Curved 16 x 4 Triple with Inner Ridges
×1
Brick Wedged, Curved 4 x 3 No Studs [Plain]
×1
Cone 1 x 1 [Top Groove]
×1
Creature Body Part, Wing 9L with Stylized Feathers
×8
Engine / Air Scoop 2 x 2
×1
Engine Smooth Large [2 x 2 Thin Top Plate]
×3
Large Figure Limb Cover, Armour with Spikes
×6
Plant, Leaves 4 x 3
×4
Plate 1 x 1
×6
Plate 1 x 12
×2
Plate 1 x 2
×29
Plate 1 x 4
×3
Plate 1 x 6
×5
Plate 2 x 2
×2
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×5
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×1
Technic Axle and Pin Connector Angled #2 - 180°
×3
Technic Pin Connector Round [Slotted]
×8
Tile 1 x 3
×4
Tile Special 1 x 1 with Clip with Rounded Edges
×2
Tile Special 1 x 2 Grille with Bottom Groove
×9
Wedge Plate 2 x 4
×3
Wedge Plate 3 x 3 Cut Corner
×2
Wedge Plate 3 x 4 with Stud Notches [Reinforced Underside]
×1
Wedge Plate 4 x 2 Left
×3
Wedge Plate 4 x 2 Right
×3
Wedge Plate 4 x 4 Cut Corner
×6
Wedge Plate 6 x 3 Left
×1
Wedge Plate 6 x 3 Right
×1
Wheel 31 x 15 Technic, 7 Pin Holes
×2
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
×6
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
×4
Arm Mechanical with Clip [Thick Support]
×14
Bar 1L with Top Stud and Two Side Studs
×19
Bar 3L
×4
Bar 4L (Lightsaber Blade / Wand)
×9
Bar 6L with Stop Ring
×3
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
×1
Brick Curved 3 x 1 No Studs
×2
Brick Round 2 x 2 Dome Top, Hollow Stud
×2
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×3
Brick Wedged, Curved 6 x 4 Triple
×2
Chain 6L [5 Links]
×2
Cone 1 x 1 [Top Groove]
×4
Cone 1.17 x 1.17 x 2/3 (Fez)
×2
Cone 2 x 2 x 2, Open Stud
×2
Equipment Telescope / Torch / Spyglass, Support Round 1 x 1 x 1 2/3
×5
Large Figure Foot, with Ball Socket 5 x 6 x 2
×2
Large Figure Hand Cover, Armor with Handles for Clips
×2
Large Figure Weapon Claw, Half
×2
Minifig Head [Plain] [Hollow Stud]
×1
Plate Round 1 x 1 with Solid Stud
×12
Plate Special 1 x 2 [Side Handle Closed Ends]
×1
Plate Special 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
×1
Tile Round 2 x 2 with Bottom Stud Holder
×4
Tile Special 1 x 2 Grille with Bottom Groove
×5
Weapon Axe Head with Twin-Blade
×3
Weapon Lightsaber Hilt with Bottom Ring
×8
Weapon Pike / Spear Flat End
×2
Weapon Sai
×2
Weapon Scythe / Crescent Blade Serrated with Bar
×3
Weapon Sword Double Blade with Bar Holder [Chi Sword]
×3
Weapon Sword Serrated with Bar Holder
×2
Weapon Trident
×1
Brick Curved 10 x 1 [Symmetric Inside Ridges]
×4
Brick Curved 2 x 1 No Studs [1/2 Bow]
×6
Brick Curved 2 x 2 x 2/3 Two Studs and Curved Slope End
×1
Brick Curved 4 x 1 Double, No Studs
×6
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
×10
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×8
Brick Sloped 30° 1 x 2 x 2/3
×6
Brick Sloped 45° 2 x 2
×4
Brick Wedged, Curved 12 x 3 Left
×2
Brick Wedged, Curved 12 x 3 Right
×2
Brick Wedged, Curved Triple 4 x 4 x 2/3, 2 Studs
×2
Brick Wedged, Sloped 4 x 2 Triple Left
×3
Brick Wedged, Sloped 4 x 2 Triple Right
×3
Brick Wedged, Sloped 4 x 4 Fractured Polygon Top
×5
Brick Wedged, Sloped 45° 2 x 4 Triple
×1
Mudguard 2 x 4 with 2 x 2 Studs and Flared Wings
×2
Plant, Grass Stem with Bar Hole [3.2mm]
×2
Plate 1 x 1
×4
Plate 1 x 2
×10
Plate 2 x 4
×8
Plate Special 1 x 4 with 2 Studs, 3 Bottom Tubes
×8
Technic Beam 1 x 11.5 Double Bent Thick
×8
Tile 1 x 6 with Groove
×2
Tile Round 1 x 1
×4
Tile Special 1 x 2 Grille with Bottom Groove
×13
Wedge Plate 4 x 4 Cut Corner
×2
Bar Holder with Clip
×10
Bracket 1 x 2 - 2 x 2
×8
Brick 1 x 1
×2
Brick 2 x 2
×1
Brick Curved 2 x 1 No Studs [1/2 Bow]
×6
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×2
Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder
×1
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×1
Brick Sloped 45° 2 x 2
×1
Brick Sloped Inverted 45° 2 x 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
×5
Brick Special 1 x 2 with Grille
×3
Dish 2 x 2 Inverted [Radar]
×2
Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Groove
×1
Plate 1 x 2
×3
Plate 1 x 3
×2
Plate 2 x 2
×2
Plate 2 x 3
×4
Plate 2 x 4
×1
Plate Round 1 x 1 with Solid Stud
Also in Trans-Yellow
×11
Plate Round 2 x 2 with Axle Hole Type 1 (+ Opening)
×17
Plate Special 1 x 1 with Clip Horizontal [Thick Open O Clip]
×1
Plate Special 1 x 2 Side Handle [Free Ends]
×2
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×2
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
×1
Plate Special 2 x 2 with 1 Pin Hole [Complete Underside Rib]
×2
Technic Axle Connector Smooth [with x Hole + Orientation]
×1
Technic Beam 1 x 7 Thick
×2
Technic Beam 3 x 3 T-Shape Thick
×2
Technic Brick 1 x 2 [1 Pin Hole]
×1
Technic Brick 1 x 2 [2 Pin Holes]
×1
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
×19
Technic Rubber Belt Large [33mm ID] [Round Cross Section]
×2
Tile 1 x 2 with Groove
×1
Tile 1 x 4 with Groove
×2
Tile Round 2 x 2 with Bottom Stud Holder
×1
Brick Curved 2 x 1 No Studs [1/2 Bow]
×2
Brick Curved 2 x 2 x 2/3
×2
Brick Curved 3 x 1 No Studs
×2
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×4
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×16
Brick Sloped 30° 1 x 2 x 2/3
×4
Brick Sloped 45° 2 x 1 Double / Inverted with Bottom Stud Holder
×1
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×1
Brick Sloped 45° 2 x 1 with 2/3 Cutout [New Version]
×12
Brick Sloped 75° 2 x 1 x 3 with Hollow Stud
×4
Brick Wedged 3 x 4 [Stud Notches]
×2
Brick Wedged, Curved 12 x 3 Left
×1
Brick Wedged, Curved 12 x 3 Right
×1
Brick Wedged, Curved 4 x 4 No Top Studs
×3
Brick Wedged, Curved 6 x 2 Left, Inner Ridges
×1
Brick Wedged, Curved 6 x 2 Right, Inner Ridges
×1
Hinge Plate 1 x 12 Locking with Angled Side Extensions and Tapered Ends, 7 Teeth
×10
Large Figure Hand Cover, Armor with Handles for Clips
×2
Large Figure Weapon Claw, with Clip
×6
Plant, Flower, Plate Round 1 x 1 with 4 Petals
×4
Tile 1 x 6 with Groove
×2
Tile 2 x 2 with Groove
×4
Wave / Flame Rounded Single with Pin
×11
Wedge Plate 3 x 2 Left
×3
Wedge Plate 3 x 2 Right
×3
Windscreen 5 x 2 x 1 2/3
×5
Brick Curved 2 x 2 x 2/3
×2
Brick Curved 4 x 2 No Studs
×3
Brick Curved Inverted 4 x 1
×6
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×12
Brick Sloped 45° 2 x 1 with Bottom Pin
×4
Brick Special 1 x 1 with Stud on 1 Side
×2
Brick Special 1 x 2 Palisade [aka Log]
×2
Brick Wedged, Curved 2 x 3 x 2/3 Two Studs, Wing End
×8
Brick Wedged, Curved 4 x 4 No Top Studs
×2
Brick Wedged, Curved 6 x 4 Triple
×2
Large Figure Weapon, Barrel with 2 Pin Holes and 3 Axle Holes
×2
Plate 1 x 2
×3
Plate 2 x 2
×5
Plate 2 x 4
×3
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×7
Tile 1 x 2 with Groove
×2
Wedge Plate 3 x 2 Left
×9
Wedge Plate 3 x 2 Right
×9
Wedge Plate 3 x 3 Cut Corner
×8
Wedge Plate 4 x 4 with 2 x 2 Cutout
×1
Bar 4L with Flame Protrusions and Marbled Trans-Yellow Pattern
×18
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
Also in Red
×2
Cone 1 x 1 [Top Groove]
×2
Dish 2 x 2 Inverted [Radar]
×2
Large Figure Weapon Accessory, Flame / Lightning Bolt with Axle Hole with Marbled Trans-Yellow Pattern
×11
Plate 1 x 2
Also in Red
×16
Plate Round 1 x 1 with Solid Stud
Also in Red
×3
Plate Round 4 x 4 with 2 x 2 Round Opening
×6
Technic Tooth 1 x 3 with Axle Hole [Rounded Underside]
×2
Tile 1 x 2 with Groove
Also in Red
×2
Tile Round 1 x 1
×8
Wave / Flame Rounded Large with Marbled Trans-Yellow Pattern
×12
Brick 1 x 4
×4
Brick 2 x 2
Also in Black
×2
Brick Curved 2 x 2 x 2/3
Also in Black
×8
Brick Curved 4 x 1 No Studs [Stud Holder with Symmetric Ridges]
Also in Black
×4
Creature Body Part, Wing 9L with Stylized Feathers
×2
Plate 1 x 4
Also in Black
×5
Plate 1 x 6
×2
Plate 2 x 8
×1
Plate Special 1 x 2 with 1 Stud with Groove (Jumper)
×10
Tile 1 x 8 with Groove
Also in Black
×2
Wedge Plate 12 x 3 Left
×1
Wedge Plate 12 x 3 Right
×1
Wedge Plate 2 x 4
Also in Black
×3
Wedge Plate 4 x 2 Left
×1
Wedge Plate 4 x 2 Right
×1
Brick Sloped 30° 1 x 1 x 2/3 (Cheese Slope)
×8
Plate 1 x 2
×4
Plate 1 x 4
×20
Plate 2 x 4
×4
Tile 1 x 2 with Groove
×7
Arm Mechanical with Clip [Thick Support]
×10
Door 1 x 8 x 12 Castle Gate (Portcullis)
×1
Large Figure Foot, with 2 Toes
×4
Large Figure Weapon Spiked Ball, Half
×2
Launcher, Large Figure Weapon, Zamor Sphere Launcher, Bottom with Axle Hole
×22
Technic Axle Connector 2 x 3 Quadruple
×2
Weapon Axe Head, Clip-on (Viking) [Thick Clip]
×1
Weapon Halberd / Axe
×1
Brick 1 x 2
×13
Brick Sloped 30° 1 x 2 x 2/3
×1
Brick Sloped 75° 2 x 1 x 3 with Hollow Stud
×11
Plate Round Corner 3 x 3
×2
Brick Curved 2 x 1 No Studs [1/2 Bow]
×6
Brick Sloped 18° 2 x 1 x 2/3 with 4 Slots / Grate
×4
Brick Sloped 45° 2 x 1 Triple with Inside Stud Holder
×6
Plate Special 1 x 1 with Tooth
×2
Plate Special 1 x 2 with Angular Extension and Flexible Orange Tip
×3
Plate Special 1 x 2 with Three Teeth [Tri-Tooth]
×2
Brick Round 1 x 1 Open Stud
×2
Dish 2 x 2 Inverted [Radar]
×3
Large Figure Limb Cover, Size 4, Armor with Ball Joint Socket
×2
Plate Round 1 x 1 with Solid Stud
×6
Wave / Flame Rounded with Base Rim
×6
Sticker Sheet 1 for Set 70147-1
×1
Sticker Sheet 2 for Set 70147-1
×1
Sticker Sheet for Set 70142-1
×1
Sticker Sheet for Set 70143-1
×1
Sticker Sheet for Set 70144-1
×1
Sticker Sheet for Set 70145-1
×2
Sticker Sheet for Set 70220-1
×1
Sticker Sheet for Set 70224-1
×1
Sticker Sheet for Set 70228-1
×1
Box 2 x 2 x 2 Door with Slot
×1
Dish 3 x 3 Inverted [Radar]
×2
Equipment Cup / Mug [Plain]
×2
Flag 5 x 8.5 with Crocodile Tribe Print
×1
Flag 5 x 8.5 with Ice Bear Tribe Print
×2
Flag 5 x 8.5 with Lion Tribe Print
×2
Flag 5 x 8.5 with Tiger Tribe Print
×1
Plate 1 x 2
Also in White
×2
Plate Round 1 x 1 with Solid Stud
Also in White
×2
Plate Round 1 x 1 with Solid Stud
×12
Tile Round 1 x 1
×2
Brick 1 x 2
×2
Plant, Round 1 x 1 - 3 Bamboo Leaves
×9
Plate Round Corner 6 x 6
×1
Plate Special 1 x 2 with Clips Horizontal [Open O Clips]
×1
Brick Special 1 x 1 with Clip Vertical [Open O Clip, Hollow Stud]
×4
Brick Special 1 x 2 with Masonry Brick Profile
×4
Plate Special 10 x 10 Octagonal Opening
×4
Plate Round 1 x 1 with Solid Stud
Also in Yellow
×4
Windscreen 4 x 4 x 4 2/3 with Handle
×1
Plate Round 1 x 1 with Solid Stud
×1
Bulkar
×1
Cragger with Shoulder Armor and Fire Chi
×1
Sir Fangar
×3
Stealthor
×2
Gorzan
×2
Vornon with Trans-Light Blue Shoulder Armor
×1
Stealthor with Trans-Light Blue Shoulder Armor
×1
Strainor with Shoulder Armor
×3
Maula
×1
Vardy with Trans-Light Blue Shoulder Armor (with 15712 Tile with Clip)
×2
Vornon with Trans-Light Blue Shoulder Armor (with 15712 Tile with Clip)
×1
Bladvic with Flame Wings
×1
Iceklaw with Neck Bracket
×1
Trakkar with Shoulder Armor
×1
Breezor
×1
Eris with Flame Wings
×1
Sibress with Shoulder Armor
×1
Tazar
×1
Razar with Flame Wings
×1
Icepaw
×1
Icebite
×1
Tormak with Spiked Shoulder Armor
×1
Gorzan with Flame Wings
×1
Sykor with Shoulder Armor
×1
Flinx with Wings
×1
Voom Voom (with 15712 Tile with Clip)
×1
Worriz with Flame Wings
×1
Sirox
×1
Saber-Tooth Tiger Warrior with Copper Plates on Jaw
×1
Saber-Tooth Tiger Warrior
×1
Crocodile Warrior with Yellowish Green Jaw
×1
Cragger with Flame Wings
×1
Crominus in Fire Chi Outfit
×1
Icepaw in Shoulder Armor
×1
Laval with Flame Wings
×1
Saraw
×1
Eris with Fire Chi
×1
Lagravis in Fire Chi Outfit
×1
Vardy (with 12825 Tile with Clip)
×2
Lundor with Shoulder Armor and Fire Chi
×2
Strainor with Trans-Light Blue Shoulder Armor
×3
Worriz with Shoulder Armor with Fire Chi
×3
Voom Voom (with 12825 Tile with Clip)
×1
Tormak in Orange Outfit
×1
Li'Ella in Dark Red Outfit
×1
Foltrax
×1
Fluminox with Shoulder Armor and Skirt
×1
Flinx
×1
Voom Voom with Trans-Light Blue Shoulder Armor
×1
Maula with Shoulder Armor
×2
Mottrot
×2
Razar with Shoulder Armor and Fire Chi
×2
Vornon with Trans-Light Blue Large Shoulder Armor
×2
Cragger with Shoulder Armor and Fire Chi
×1
Mungus (Big Fig)
×1
Laval with Shoulder Armor and Fire Chi
×1
Rogon with Flame Wings
×1
Rinona in Fire Chi Outfit
×1
Mottrot with Shoulder Armor
×1
Crokenburg
×1
Crocodile Warrior with Tan Jaw
×1
Icerlot
×2
Ice Bear Warrior with White Legs
×2
Ice Bear Warrior with Trans-Light Blue Right Leg
×2
Li'Ella in Dark Blue Outfit
×2
Lion Warrior
×2
Lioness Warrior
×2
Frax with Dark Red Legs
×1
Vultrix
×1
Tick each piece as you find it, or mark it missing.
LEGO takes requests for pieces missing from a new set through its customer service site. The form asks for the set number and each piece's element ID, the number printed beside the piece in the parts list at the back of the instructions. This checker lists both.
Request a replacement from LEGOMark a piece missing and your list links it to an eBay search for that part, which also covers pieces from older or second-hand sets.
Copy or download your missing list (the CSV opens in any spreadsheet), or print the whole checklist and tick pieces off on paper. Your marks stay in this browser, so you can check a big set over several sittings.
