r/legotechnic
Long nosed pliers.
I've been building technic for about ten years now. I have dozens of sets, some of which I have taken apart and reass...
r/legotechnic
A simple build, but it’s become a personal favourite
I know it’s a pullback model, although I like the added steering for photo purposes. Also this Technic scale works be...
r/legotechnic
Does it work as it should? (CaDA AMG GT3)
I'm building the C64008W and I'm not sure if the gearbox is assembled correctly, so I slapped on two wheels for a tes...
r/legotechnic
How to start an alternate build? Moving on after pivoting. Illustrated with a spaceship.
submitted by /u/Brickker [link] [comments]
r/legotechnic
Replaced the rubber band with a DC motor and 3D printed propeller on my LEGO Technic car
Mount designed in TinkerCAD from caliper measurements — first print, perfect fit. The propeller was repurposed from a...
r/legotechnic
Super Constellation 1:60
Description see post. In my opinion one of the most beautiful planes ever built. submitted by /u/The69thing [...
r/legotechnic
8880 Supercar. Built once in '94, sat on a shelf for many years, then went into a box. Washed and...
I got this set in '94 and had great fun, but I probably messed up the differentials because it never drove right. I p...
r/legotechnic
Need help with Ford GT 2022
I started building Ford GT 22 yesterday and when I finished first part, where u build the engine all tht internal stu...
r/legotechnic
42109 F1 Alternate Build
Recently built this Formula 1 alternate model by Davejsp using only the parts from the 42109 Top Gear Rally Car. Cons...
r/legotechnic
Annoying.
Am I the only person who has trouble with the perspective on theses parts. submitted by /u/1RabidFish [link]...
r/legotechnic
Little door lock mechanism
submitted by /u/RequirementCertain21 [link] [comments]
r/legotechnic
Large Technic CV Joint Compatibility?
Hey friends, So I really appreciate how much more robust the large CV joint feels compared to the smaller variety. Bu...
r/legotechnic
8455
submitted by /u/PatternVirtual5522 [link] [comments]
r/legotechnic
Koenigsegg 1:8 rumors
I was looking at other 1:8 koenigsegg jesko/sadair spear and found two other designs. I dont think any of these are "...
r/legotechnic
Some of the Technic sets from my childhood/early teen years.
submitted by /u/Veddermandenis [link] [comments]
r/legotechnic
Lol
I've tried and tried but I just can't get the pins to follow those approach vectors. Lol submitted by /u/1Rabid...
r/legotechnic
This thing is freakin awesome!
I think that this is the second car I've bought by this designer. I only discovered CaDA a year ago and I'm hooked. M...
r/legotechnic
Got a second shelf 🤩
Dont forget the concorde on top 👌🏼 submitted by /u/Louren2008 [link] [comments]
r/legotechnic
Dom's Fast & Furious car 42111 vs 42231
Received model 42231 yesterday, finished it this morning. Took a few pictures of it side-by-side with the earlier mod...
r/legotechnic
Large Mechanical Actuator - Need Advice
I am trying to get an actuator that is 3 pinholes wide and 4 pinholes tall. The length is good for my purposes, but t...
r/legotechnic
Tools that can support me in building a custom Lego set
submitted by /u/Upstairs_Report_4594 [link] [comments]
r/legotechnic
Aston Martin Aramco AMR25 F1® Car (42240)
Haven't seen this posted yet? submitted by /u/PelayoEnjoyer [link] [comments]
r/legotechnic
Hot-rod V6
Repost, since I'm ditching my old reddit acc. Rear power, front engine and front steering. Feel free to rummage aroun...
r/legotechnic
Rear Suspension for 1:10 Super Car
My compact rear suspension for a 1:10 scale technic super car I'm working on. More to follow, working on instruction...
r/legotechnic
Lego Technic piece too tight
i tried oil(very little, like a drop or so) i tried using the seperator, doesnt work. Is there any way to remove it? ...